Examples of 'wires should' in a sentence
Meaning of "wires should"
Wires should: This phrase is incomplete and needs further context to provide a specific definition. It could potentially refer to a statement that outlines a recommendation or requirement related to electrical wires and their installation, maintenance, or specifications. Without additional information, it is difficult to provide a more specific meaning
How to use "wires should" in a sentence
Basic
Advanced
wires should
No other wires should be attached to this connection.
No loose strands or loose wires should be present.
Wires should be tensioned as specified in product literature.
Connecting these wires should be fairly easy.
All wires should be joined by standard connectors.
Several aspects of these wires should be noted.
All wires should be treated as if they are live.
Speakers and their wires should be tested first.
Wires should be color coded for ease of maintenance.
Passing over any underground wires should be done perpendicularly.
The wires should be on the front.
The resistance of connecting wires should be almost negligible.
All wires should be replaced regularly.
Any insulation on the ground wires should be stripped.
Wires should be in proper location to avoid damage from being overheated.
See also
Preferably a set of two conductive wires should be inserted.
Load wires should also be twisted together to minimise inductance.
Heater wire and all connecting wires should be copper.
The wires should be replaced.
Periodic maintenance and repair of old and damaged wires should also be taken into consideration.
Damaged wires should only be replaced by an authorised service engineer.
O The metal portions of the two separate wires should not touch.
Loading of the wires should be considered carefully.
During the installation and movement of the components, the wires should not be pulled.
All ground wires should originate from a single point.
For minimum radiation, alternate neutral wires should be oppositely phased.
Wires should be performed before proceeding to the next step.
The diameter of the saw wires should however not be considered as limiting.
Wires should be secured so that they do not interfere with safe vehicle operation.
The selections for color of wires should be followed by the local electrical laws and.
Wires should not be used because they cut into the stem as it grows heavier.
Other types of wires should be treated as follows:.
Wires should always be rolled up in a fairly large, loose coil.
For better performance, the wires should be electrically shielded.
The wires should be connected positive to positive and negative to negative.
Any insulation on the ground wires should be stripped back about ¾ inch.
The two wires should be oriented furthest away from the sensor port.
Once it is in the design you desire, the wires should be carefully removed.
The two hot wires should be at the top of the thermostat.
I do not know what to say . The wires should be replaced.
Conductive wires should then be connected to each of the keys of the keyboard.
This lighting alternative - fiber optic lighting . The wires should be protected from ingress of water.
Audio wires should be sized properly by your licensed installation electrician for your.
Cracked, damaged, or faulty wires should be replaced.
The wires should be long enough to allow for a safe and secure installation.
The gauge of these wires should be at least 18 AWG.
The wires should lead out of the sensor toward the front of the chair.
The terminal end ( *4 ) of the shield wires should be open and insulated.
Such wires should then generate magnetic fields that will act as atom traps.
For long runs over 100 feet, larger copper wires should be used.
You'll also be interested in:
Examples of using Wires
Show more
Do not operate if wires and terminals are exposed
Wires can be difficult to see when flying
Connect house wires to ventilation fan wires
