Examples of 'wiring box' in a sentence
Meaning of "wiring box"
Refers to a container or enclosure used for organizing and connecting electrical wires. It is commonly used to keep wires and cables neat, secure, and protected from potential damage or hazards
How to use "wiring box" in a sentence
Basic
Advanced
wiring box
Remove wiring box cover and screws.
Remove a knockout from the wiring box.
Reattach the wiring box cover loosely.
Plenty of space for cables in wiring box.
Replace wiring box cover and screws.
Replace electrical wiring box cover.
Wiring box to wall wall anchors may be needed.
Then remove the wiring box cover.
Remove wiring box cover from the cooktop plenum.
Reinstall the wiring box cover.
Remove screws and cover from the wiring box.
Replace the wiring box cover and the screws.
Store wires in the wiring box.
Install cooktop wiring box cover on plenum wiring box.
Allow at least six inches of wiring inside of wiring box.
See also
Connect power cable to wiring box using proper connector.
Slide the panel sideways to expose the electrical wiring box.
Secure power cable to wiring box with appropriate connector.
Connect the ground wire to green ground screw in wiring box.
Secure cable to the wiring box using an appropriate connector.
Remove the cover from the large electrical wiring box.
See the wiring box cover for correct wiring.
Secure the conduit to the wiring box through.
Remove wiring box cover located on the top section of the.
Pass power cable through the wire clamp in the wiring box.
Secure the conduit to the wiring box through a conduit connector.
Install the wire clamp on the back side of the wiring box.
Connect cable into wiring box using provided wire connectors.
The remote blower must not be wired into the wiring box.
Replace the wiring box cover and securely tighten the screws.
Route supply wires to the thermostat wiring box if not already present.
Remove wiring box cover located on the top section of the chimney support.
Remove the cover from the wiring box and remove one knockout.
The wiring box may be located on the right or left side in the hood.
Carefully push the connected wires back into the wiring box housing.
Connect power cable into wiring box using provided waterproof wire connectors.
Unhook the tab on the bottom and remove the electrical wiring box cover.
The connection at the hood liner wiring box must be with copper wire only.
Feed the range hoods power cable through the lower hole of the wiring box.
Electrical wiring box Shape wires so that the service lid will fi t securely.
Do not wire the remote blower black and white wires into the wiring box.
Install wiring box cover and secure it with 2.
Use Phillips screwdriver and remove wiring box cover.
Remove the back cover, wiring box cover and electrical wiring knockout.
Install a UL or CSA listed strain relief in the wiring box so that.
Secure power cable to wiring box with appropriate connector and re-attach outlet box cover.
DO NOT touch any wires or insert anything into the wiring box.
Simply connect our wiring box to your lamps via the correct direct / zero lines.
Discard the wire connector joining BLACK and WHITE wires from wiring box receptacle.
Remove the wiring box cover as shown in Figure 7.
You'll also be interested in:
Examples of using Wiring
Show more
Wiring is pulled trough column and base
Alterations of the wiring diagram are now allowed
Wiring should be carried out by qualified personnel
Examples of using Box
Show more
Pull the box out as far as possible
You blind someone with that box
The box the vacuum cleaner came in
