Examples of 'work hardening' in a sentence
Meaning of "work hardening"
Work hardening is a metallurgical process whereby a metal or alloy becomes stronger and more resistant to deformation as a result of plastic deformation or applied stress. It involves subjecting the material to repeated plastic deformation, which leads to the rearrangement of the internal structure and an increase in its hardness and strength
Show more definitions
- The repeated plastic deformation of a material, causing a permanent distortion of its crystal structure, and an increase in its strength
How to use "work hardening" in a sentence
Basic
Advanced
work hardening
Eliminate work hardening to facilitate continued cold processing.
Rolling provides additional work hardening vía cold forming.
Increase in the number of dislocations is a quantification of work hardening.
Reduction of work hardening by recovery annealing.
This is accompanied by surface work hardening.
Shape of the work hardening curves.
Work hardening may be desirable or undesirable depending on the context.
The rate of work hardening is similar to.
Study of ageing after work hardening.
Coining is the work hardening of metal between tools.
Positive feeds should be used to overcome work hardening effects.
Work hardening of the grains.
They have long been at work hardening the will.
Work hardening coefficient is important from the point of view of drawability.
The primary species responsible for work hardening are dislocations.
See also
A subsequent work hardening by cold rolling is not necessary any longer.
Cold forging typically results in work hardening of the piece.
The work hardening.
Effect of music on subjective reports of pain in a work hardening setting.
Work hardening of solids.
This metal was chosen because of the absence of ageing after work hardening.
Work hardening occurs most notably for ductile materials such as metals.
The effect depends on the degree of work hardening preceding the ageing.
Other problems with stainless steel rigging are corrosion and work hardening.
This is due to the balance between work hardening and annealing thermal softening.
These tests show the presence of a well on the strain dependence of the work hardening.
This is basically achieved by work hardening at least a portion of the modular component connector.
In such a treatment phenomena such as aging after work hardening may play a part.
The increase in work hardening reduces the time required to complete the static recrystallisation.
This effect is enhanced by the increased work hardening towards the tail of the rivet.
The alloy can achieve its strength through solid solution hardening or work hardening.
The generalised cold work hardening curve is the envelope of the preceding tensile curves.
The nickel layer absorbs the heat and prevents work hardening of the part.
We offer a range of work hardening and job trial programs throughout Ontario.
The process of drawing improves the mechanical properties of the wire due to work hardening.
This cementite and the effect of work hardening provide the wear resistance required of rails.
This treatment remains compatible with maintained mechanical properties provided by work hardening in the bulk.
The work hardening of the studied microstructures increases with the AF fraction.
The higher titanium the higher is also the work hardening rate during drawing.
Problems of work hardening of the material being cut, are reduced.
Reduction of area at fracture Ζ coefficient of work hardening η.
Beyond this point, work hardening commences.
Work hardening is a consequence of plastic deformation, a permanent change in shape.
Second, there were work hardening fatigue failures.
The work hardening ratios and the recrystallization ratios were as follows,.
By this heating and holding, work hardening is removed.
Work hardening is performed by wet drawing with a grease in emulsion in water ;.
At the same time, work hardening can be controlled better.
Additionally, repeated rolling of the protecting plate can cause work hardening.
Structure, and a degree of work hardening is determined by occurrence of stacking faults.
You'll also be interested in:
Examples of using Hardening
Show more
Blackout really hardening as the favourite here
Hardening and tempering substances for metals
Determination of hardening criteria for the above
Examples of using Work
Show more
You got to work harder than that
I work for him as sort of a personal assistant
We did this at work with those promo videos
