Examples of 'working depth' in a sentence
Meaning of "working depth"
The phrase 'working depth' refers to the level of intensity, focus, or thoroughness with which one engages in work or a specific task. It suggests a deep level of involvement, attention to detail, or expertise in a particular area or field
How to use "working depth" in a sentence
Basic
Advanced
working depth
They are of no use if the working depth is limited.
Excessive working depth reduce the working depth.
Thus obtained is a virtually constant working depth.
Adjust working depth to a suitable depth.
Following evaluating the right working depth.
Hydraulic working depth control cylinder.
This sets the soil working depth.
Adjust the working depth to the relevant soil conditions.
Simple screw adjuster for precise working depth.
The optimum working depth varies with soil conditions.
Quick adjustment of working depth.
Adjust the working depth according to the soil conditions.
Iron wheels to regulate the working depth of the element.
Working depth not suitable for grass and ground conditions.
This enables the soil working depth to be adjusted.
See also
A problem with current harrowing apparatus is the working depth.
We prefer working depth to breadth.
This should be done after the soil has been broken to the full working depth.
This setting will permit a working depth of about four inches.
Working depth and angle are set independently of each other without tools.
Then carry out the working depth adjustment as described above.
Please refer to the operating manual for the maximum recommended working depth.
The final working depth automatic was tested in the autumn sowings.
Submerge the breaker to the maximum working depth for that particular work.
The working depth can be adjusted via the angle of the disc tracks.
Iron wheels to regulate the working depth of the element with ball bearings.
Setting the supplied air pressure is also dependent on the working depth of the breaker.
You adjust the working depth by moving the plastic pins on the support wheel.
Push the device down using the handle until your desired working depth is reached.
The working depth is easily adjusted using a pin without having to lift the Uni wheel.
Focus dynamic variable mode of the optical system increases the working depth of the field.
Poor results Working depth too small.
Sandy and slightly clayey soils Soils that are loosened regularly Medium working depth for.
Bad tilling result Working depth too low.
Working depth too deep, continue work with.
Upward pressure on the handles will increase the working depth and reduce the forward speed.
The working depth is adjustable to 4 heights referring to below table.
Downward pressure on the handles will reduce the working depth and increase the forward speed.
In another case, the chamber is a working tank submerged at the working depth.
The user can thus advantageously set the working depth of said rotary cultivator 1.
Then, exercise only the pressure that is needed to keep the working depth.
Furthermore, the relatively large working depth can have a negative effect on the decomposing biologic activity.
Kinematic position II for greater working depth.
As a result, the working depth of said opening tools 10 can easily be adjusted.
Move unit into field & lower to desired working depth.
A maximum working depth of between 15 and 25 cm is recommended.
The disc harrows provide a minimum working depth of around 5 cm.
The working depth is thereby limited to ± 100 m below the water surface.
Clamped, put into the sea and lowered to the working depth.
Increasing the working depth ( cutters towards the ground ) 1.
You'll also be interested in:
Examples of using Working
Show more
I am throwing working class out on his ass
Working with and for young workers
Donor support working group meetings were held
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
