Examples of 'worm shaft' in a sentence
Meaning of "worm shaft"
A worm shaft is a mechanical component that consists of a threaded shaft and a worm gear, often used in machinery to convert rotational motion into linear motion
How to use "worm shaft" in a sentence
Basic
Advanced
worm shaft
Worm shaft thrust bearing housing.
A flange is formed at the other end of the worm shaft.
Worm shaft sleeve bearing.
Force is transmitted directly to the worm shaft without intermediate gears.
The worm shaft is not restricted in its rotational direction.
In addition, the rotational speed n of the worm shaft is measured.
A tip of the worm shaft is formed with a threaded section.
In various embodiments, pressure is controlled by adjusting rotational velocity of a worm shaft.
Leave the worm shaft in the cutter housing when you are going to make sausages.
With such a configuration, movement of the worm shaft 2 in the axial direction is restricted.
The worm shaft is associated with a collar setup and is divided into sections.
Thus, drive from the motor rotor is coupled to the worm shaft through the spider.
Both flanks of the worm shaft will now be coated with spotting color.
C 3 Place the cutter unit onto the worm shaft.
The worm shaft 2 is preferably manufactured here from metal.
See also
This shaft extends at a right angle to the worm shaft 40.
The worm shaft is responsible for conveying biomass ( feedstock ) through the press.
Thereby, assembly of the worm shaft 2 to the gear case 3 is completed.
The worm shaft consists of a tubular shaft with welded-on solid thread made of sheet steel.
A helical groove is formed on the outer peripheral surface of the worm shaft 16.
In a preferred embodiment, the worm shaft is supported rotatably inside the planet carrier.
Fit the first hole plate ( large hole plate ) inserting it into the worm shaft.
The rotational speed of the worm shaft 2 can therefore be precisely adjusted vÃa a control unit.
The gear housing 7 includes a part 7b radially facing a part of a circumferential surface of the worm shaft 11.
The worm shaft 16 extends in the vertical direction.
The worm wheel 1 and the worm shaft 2 form a worm speed reducer.
The worm shaft 2 is housed in a metallic gear case 3.
FIG . 4 is a schematic view illustrating a worm shaft and a worm wheel, which mesh with each other.
The worm shaft 2 meshes with a worm wheel 7 vÃa a worm toothing 6.
Accordingly, transmission of oscillation to the worm shaft 103 can be inhibited.
Therefore, the worm shaft 2 is slightly inclined by the biasing force of the coil spring 12.
As a result, transmission of oscillation to the worm shaft 103 can be inhibited.
Insert the safety fuse, worm shaft into the cutter housing, the four-square inlet first.
Also, the screw member 45 performs the axial positioning of the worm shaft 11.
C 2 Insert the worm shaft into the cutter housing, the plastic end first.
The spring 50 is wound to store energy as the motor turns the worm shaft 32.
By means of a worm shaft 15, the containers 14 are brought at the appropriate mutual distance.
The auger transmission unit 20 has a worm shaft 21 that serves as an input shaft.
The worm shaft 2 meshes, by way of the worm toothing 6, with the worm wheel 7.
The motor shaft 60b and the worm shaft 103 are engaged by being splined and fitted together.
You'll also be interested in:
Examples of using Worm
Show more
I am trying not to worm out of this man
The worm was not in his internal organs
That miserable little worm insulted my manhood
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
