Examples of 'aφ' in a sentence
Meaning of "aφ"
aφ (noun) - This phrase does not have a commonly recognized meaning in English. It may be a symbol, an abbreviation, or a term from a specialized context
How to use "aφ" in a sentence
Basic
Advanced
aφ
Aφ is expressed in radians per centimeter when kz is in radians per centimeter.
The lower output signal contains a constant error Aφ.
Let Aφ be the phase stability margin and Ap be the modulus stability margin.
The phase difference is represented as Aφ.
The phase shift Aφ can also be modulated by applying the electric voltage V.
The adjustment message includes an identifier of this relay node and a phase shift Aφ.
If this difference in azimuth is Aφ, then h is substantially proportional to Aφ.
Determining the polarization ellipticity angle t based on the phase offset Aφ and on the ratio R.
The calibration phase shift Aφ cal, as previously determined during said calibration step.
Circular variance of Aφ.
It is also possible to omit the phase displacement Aφ from the electronic scan antenna 13.
They are sent in a mixer 8 which determines the value of the phase shift Aφ.
In this case, the phase difference Aφ is no longer zero.
However, the optics of the highly twisted state depends very little on d and Aφ.
In the example represented, this certain value Aφ 0 corresponds to the desired phase shift interval.
See also
In the absence of " non reciprocal " disturbance, this phase difference Aφ is zero.
Reducing the phase-shift Aφ step makes it possible in particular to reduce the spurious radiations.
Indeed, for a constant antenna state, Aφ is constant.
Clearly adjusting the phase-shift Aφ varies the preferred direction of polarization of the antenna.
For the perpendicular polarization minimum, the phase-shift has a value Aφ 1.
The higher the Aφ 0 value, the faster the convergence.
In practice, the paralleling substep generally lasts less than 10 % of the phase time Aφ.
In this case, the applied phase-shift Aφ depends on the state of the diodes.
The relationship giving Aφ is,.
And the calibration phase shift Aφ cal as previously stored in the memory means 143.
The previous phase correction value δ p is thus initialized ( step 39 ) to a certain value Aφ 0.
This is true only on condition that this phase shift Aφ ranges between 0 and 2 . pi.
A second measurement of Aφ P 74 is obtained and added to the first using an adder function 72.
Similarly, it is noted ( curve 2 ) that a phase shift Aφ is generated by the amplifier.
The slope d ( Aφ ) / dt of the phase-shift Aφ as a function of time t.
Thus, the addressee node 13 transmits the phase shift Aφ to the relay node 12.
The phase difference Aφ is then greater than +2π or less than -2π.
The addressee node 13 thus computes a phase shift Aφ for the relay node 12.
The phase shift interval Aφ 0 is therefore subtracted from the current phase shift φ ( step ( e ) ).
By way of example, the initial range widths Aθ 0, Aφ 0 and Ah 0 will be considered.
