Examples of 'abrasion test' in a sentence
Meaning of "abrasion test"
This phrase refers to a type of test performed to determine the resistance or durability of a material by subjecting it to friction or rubbing against another surface. It is commonly used in the evaluation of materials used in manufacturing, such as coatings, paints, or fabrics
How to use "abrasion test" in a sentence
Basic
Advanced
abrasion test
For sun roofs no abrasion test is required.
The abrasion test is therefore not significant.
This sample then was subjected to an abrasion test.
Abrasion test on the internal face.
The compositions were tested in a cuticle abrasion test.
Abrasion test on the external face.
Falling sand abrasion test.
Abrasion test of the external face.
They have subsequently been subjected to the same abrasion test.
Abrasion test of the internal face.
The luminous transmittance shall be measured before the abrasion test.
The abrasion test is conducted as follows.
The spectral transmittance shall be measured before the abrasion test.
Said abrasion test is conducted as follows.
The scratch resistance was determined by the abrasion test by means of an abrasive eraser.
See also
This abrasion test was carried out with water.
The average cycles to failure was calculated from the three abrasion test results.
An abrasion test was made on the obtained dividable tablets.
The change in haze after the sand abrasion test was used to represent abrasion resistance.
Abrasion test procedure.
GRSG agreed on the need to review the abrasion test.
Pico abrasion test.
These samples were then measured for abrasion resistance using the Taber abrasion test.
The methods of the abrasion test and the baking test are as described below.
The samples were also tested for abrasion resistance using the Taber abrasion test.
Abrasion test No test for the glass surface.
Sample cutter for Martindale abrasion test.
A Taber Abrasion test evaluates the resistance of a material to abrasive wear.
Table IX contains abrasion test results.
The abrasion resistance of the AB film was tested using the Bayer abrasion test.
Wet Abrasion The wet abrasion test can be applied to paper or plasterboard.
The most direct measure is the Brass Einlehner Abrasion test.
Abrasion test was done using the AATCC Crockmeter.
The coated panel is subjected to the Taber abrasion test and the SBAR test.
The abrasion test used is described in detail in the following publications,.
This type of bowl is also subjected to the same abrasion test as in example 1.
The abrasion test was conducted in a multidirectional mode using 0 emery paper as the abradant.
Since the non-coated tablets were highly hygroscopic, their weight increased in the abrasion test.
The results of the abrasion test are shown in Table 3.
FIG . 3 represents a snapshot of test pieces made of composite material having undergone an abrasion test.
The results of the abrasion test are illustrated in Table 8 below.
Fig . 14 is a diagram showing an abrasion test method.
Through the abrasion test with a USA one-dollar note.
In the preceding examples, the Brass Einlehner abrasion test was conducted as follows,.
The abrasion test is passed in the case of samples 3 and 4.
The abrasion resistance was evaluated by the soil abrasion test specified in ASTM G 65.
Abrasion test of the film,.
Results of the Bayer abrasion test are tabulated in Table 4.
Abrasion test Using a thrust-type friction and abrasion tester pin-on-disk type, see Fig.
Results from the Taber Abrasion test are summarized in Table 1.
You'll also be interested in:
Examples of using Abrasion
Show more
Test of resistance to abrasion on the outer face
Abrasion protection via external clamp profi le
Test of resistance to abrasion on the inner face
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
