Examples of 'adhesion testing' in a sentence
Meaning of "adhesion testing"
adhesion testing - a process of assessing the strength of adhesion between two substances or materials
How to use "adhesion testing" in a sentence
Basic
Advanced
adhesion testing
The laundered samples were then subjected to adhesion testing.
Paint adhesion testing.
The plates were washed and bacteria added for adhesion testing.
Hardness and adhesion testing destroys the surface of a press plate.
Panels were then subjected to accelerated corrosion testing and paint film adhesion testing.
Adhesion testing on the painted panels was evaluated under the following conditions.
Table II lists the results of adhesion testing for the samples.
Adhesion testing is performed to assess whether the coating adheres to the coated substrate.
Stable I lists the results of adhesion testing for the five samples.
Adhesion testing was performed to assess whether the coating adheres to the coated substrate.
A specimen here was subjected to impact and cross-hatch adhesion testing.
Adhesion testing as described above was performed with several of the PAE creping adhesives.
Since no ink transfers to the film, ink adhesion testing is inapplicable.
ADHESION Adhesion testing was performed to assess whether the coating adheres to the metal substrate.
The release coatings were subjected to rub-off, release value and subsequent adhesion testing.
See also
The strip adhesion testing is also represented in Table III.
CAT Technology, The new standard in adhesion testing.
Procedure for Adhesion testing Crosshatch adhesion was determined according to the following procedure.
Polyurethane coating Remove particulates ; clean with ALSAN All-Purpose Cleaner No primer Adhesion testing is recommended.
Specimens for peel adhesion testing were prepared in accordance with the following formulae,.
Adhesion testing was visual and a " good " rating roughly corresponds to 2 in Table 1.
The results of the foregoing adhesion testing are listed in Table 2 below.
Adhesion, Adhesion testing is performed to assess whether the coating adheres to the substrate.
The results of this adhesion testing to cotton is set forth in Table 2 below.
All adhesion testing was done on an Instron Model 4465 testing machine.
Example 3 This example describes adhesion testing with the polymer products prepared according to Examples 1 and 2.
Adhesion Testing Procedure Printed lenses were hydrated for 2 hours at 98°C in a pH 8 saline solution.
You'll also be interested in:
Examples of using Adhesion
Show more
Test for adhesion performance on wet surfaces
Transition from high to low adhesion surfaces
Very high adhesion and quick drying
Examples of using Testing
Show more
They have also been testing antidotes on monkeys
Seed testing laboratories evaluate these characteristics
Improve consistency of testing between test houses
