Examples of 'adhesion test' in a sentence
Meaning of "adhesion test"
This phrase refers to a procedure or examination performed to assess the adhesion strength or bonding quality between two materials or surfaces. It typically involves applying a force or stress to evaluate the level of attachment, cohesion, or stickiness between the substances. Adhesion tests are commonly conducted in various industries, such as manufacturing, construction, and automotive, to ensure the reliability and performance of bonded materials
How to use "adhesion test" in a sentence
Basic
Advanced
adhesion test
Adhesion test strips prepared by the following procedure.
It is recommended that an adhesion test be performed.
Adhesion test results are given below.
Bonding to the substrate is determined by a tape adhesion test.
Adhesion test at high temperature.
All of the samples passed the adhesion test.
The adhesion test results are presented in the table below.
Bonding to the substrate was determined by a tape adhesion test.
The pummel adhesion test was performed to approximate impact dissipation.
The coated samples were then subjected to an adhesion test.
A dust adhesion test using steel wool was also performed.
Creepage was measured in accordance to the scrape adhesion test.
The adhesion test was performed using the adhesive composition.
Peeling after adhesion test.
The same adhesion test is then carried out as described above.
See also
Adhesion is tested by the crosshatch adhesion test as described hereafter.
The adhesion test conditions are the same as those described previously.
Example of adhesion test.
The adhesion test was performed in the same manner as described above.
Example of blocks with polyurethane material layer extracted adhesion test.
Tyre adhesion test.
The test items are the same as in the primary adhesion test.
The cross hatch adhesion test on the lens was carried out.
The panels are subjected to a bond strength adhesion test as detailed below.
Green tack adhesion test is applied to the molten polymers or adhesives.
Discoloring was caused and a black color portion peeled off in an adhesion test.
Both the adhesion test and the corrosion resistance showed satisfactory results.
The test board used is the same as that used in the adhesion test.
A varnishing test with subsequent adhesion test must be carried out on any kind of substrate.
All of the printed samples were then evaluated using a crosshatch adhesion test as follows.
The results of the adhesion test are recorded as average failure strengths in Table I.
The improved wet out strengthens the bond as demonstrated through adhesion test results.
The Paint Adhesion Test is performed within one minute after removal from the humidity environment.
The painted test substrates are the same as those described in the peel adhesion test.
The composite film was subjected to the Adhesion Test as described above and passed.
These samples are then dried under lab conditions for two day before the adhesion test.
The composite film was subjected to the Adhesion Test as described above and failed.
Alcohol Resistance Samples were prepared and conditioned as described in the adhesion test above.
The Paint Adhesion Test is performed within one minute after removal from either test cabinet.
E Japanese comments on tyre wet adhesion test.
Conduct Adhesion Test on your substrates before application.
After this soaking the adhesion force F is measured with the aforesaid adhesion test.
Table 3 summarizes the adhesion test results.
Adhesion test block are glued to the over-moulded material.
The samples are then tested according to the Peel Adhesion Test Method.
Then, an adhesion test was performed to evaluate the resistance to gold plating.
The peel force is measured according to the Peel Adhesion Test Method.
The results of the adhesion test are summarized in Table 3.
The bending test as shown in figure 5 is basically an adhesion test.
After four days, a tape adhesion test is performed.
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Adhesion
Show more
Test for adhesion performance on wet surfaces
Transition from high to low adhesion surfaces
Very high adhesion and quick drying
