Examples of 'adjusting wheel' in a sentence
Meaning of "adjusting wheel"
adjusting wheel: It refers to the process of making changes or modifications to a wheel's position or alignment to ensure proper functioning
How to use "adjusting wheel" in a sentence
Basic
Advanced
adjusting wheel
Recommended number of strokes adjusting wheel setting.
Set the adjusting wheel to coarser.
Set the fineness with the adjusting wheel.
Turn the adjusting wheel as indicated on.
Recommended stroke speed position of the adjusting wheel.
Turn the adjusting wheel clockwise.
Has to be released to tension chain with adjusting wheel.
Insert the adjusting wheel axle through the side.
A potentiometer is linked mechanically with the adjusting wheel.
Use the adjusting wheel to make the desired setting.
Recommended position of the adjusting wheel.
The adjusting wheel is on the top side of the switch handle.
Must be released to allow chain to be tensioned with adjusting wheel.
Turn the adjusting wheel to regulate the amount of paint released.
Set the desired hour by turning the adjusting wheel to the left or right.
See also
Turn the adjusting wheel to the left or right to set the desired minutes.
Features Stroke rate adjusting wheel.
You can use the adjusting wheel on the spray gun to control.
Adjust the suction to your comfort level by rolling the Vacuum Adjusting Wheel.
The numbers on the adjusting wheel correspond approximately with the following spindle speeds.
The current Level is shown with the number marked on the Vacuum Adjusting Wheel.
Setting DPI and adjusting wheel scrolling by mouse without any driver or software.
The maximum adjustment range with the adjusting wheel is 8 mm.
Four Adjusting wheel.
The required speed can be preselected with the adjusting wheel 5.
Adjusting wheel guard NOTE, Before any work on the machine itself, pull the mains plug.
Unscrew the brake screw on the side opposite the adjusting wheel figure 4.
Turn the adjusting wheel anti-clockwise.
Advantageously the locking element comprises an arc-shaped bridge part for bridging the adjusting wheel.
Set the revolution selection using the adjusting wheel on the on / off switch.
Turn the adjusting wheel to “ coarse ” with the.
A pin 4 a is placed off-centre on the adjusting wheel.
The adjusting wheel can not be turned to the “ fine ” setting.
Switch between kilometers and miles without adjusting wheel circumference ( mm ).
Adjusting wheel for setting the temperature * * depending on the features / model.
Stepless revolution selection using the adjusting wheel on the on / off switch 5.
With the adjusting wheel ( 1 ) the stress of the saw band can be corrected.
For sanding we recommend the following settings for the adjusting wheel 1-2.
Sanding work Adjusting wheel set - ting.
You can adjust the cutting speed by turning the adjusting wheel 13.
Figure 1, Turn the adjusting wheel to set the fineness.
For machines with electronics systems, we recommend the following settings for the adjusting wheel 1-2.
The EHR 20.1 R is equipped with an adjusting wheel in order to preselect the required speed.
Attach the “ Extender base ” to the “ Elongation bars ” by turning the adjusting wheel clockwise.
The adjusting wheel is on the top side of the switch handle A - minimum, G - maximum.
Roller blind 1 is additionally provided with locking means for locking the adjusting wheel 11 against rotation.
Turn adjusting wheel ( 1 ) clockwise until the saw band does.
The desired number of strokes is set withthe adjusting wheel 2.1.
If necessary, you can readjust the routing depth by turning the adjusting wheel 6.8.
You'll also be interested in:
Examples of using Adjusting
Show more
Adjusting the balance effects all sources
Proceed as for adjusting the left fence
Adjusting the white balance manually recommended
Examples of using Wheel
Show more
The tiny wheel actually does have chores
He could barely see over the wheel
Wheel bearings are clean and free of moisture
