Examples of 'adsorption isotherms' in a sentence
Meaning of "adsorption isotherms"
adsorption isotherms: This phrase relates to the study of physical adsorption of gas or liquid molecules onto a solid surface at a constant temperature. It is commonly used in the field of chemistry or materials science to analyze interactions between adsorbates and adsorbents
How to use "adsorption isotherms" in a sentence
Basic
Advanced
adsorption isotherms
Graphical representations of adsorption isotherms are provided.
The adsorption isotherms give at the.
The system thermodynamics is represented by adsorption isotherms.
Results from the adsorption isotherms experiment.
Adsorption isotherms could also be possible with this method.
There are five general types of adsorption isotherms.
Adsorption isotherms were constructed using the set of experimental data of eight mathematical models.
Desorption of a component occurs because adsorption isotherms are strongly influenced by temperature.
Tests carried out in batch allowed the establishment of adsorption isotherms.
Adsorption equilibrium was evaluated from adsorption isotherms determined at different temperatures.
The method of fluorescence anisotropy titration was used to construct the adsorption isotherms.
The adsorption isotherms as well as the activity of the adsorbed hemoglobin will be measured.
Specific surface area was determined through nitrogen adsorption isotherms method.
The water and the iprodione adsorption isotherms for MIPs and NIPs were determined.
Freundlich desorption isotherms are determined on the soils used in the adsorption isotherms experiment.
See also
The adsorption isotherms could be fitted well by the Langmuir model.
The existence of micropores and mesopores was confirmed through physisorption of nitrogen and adsorption isotherms.
Adsorption isotherms in all three cases follow the Langmuir equation.
The corrosive inhibition efficiency and its mechanisms were investigated through polarization curves and adsorption isotherms.
The adsorption isotherms were fitted to the two models proposed by Langmuir and Freundlich.
The partition coefficient Kp is also related to the product adsorption isotherms.
The adsorption isotherms of these solids are of type I corresponding to microporous samples.
The specific surface área can be determined from a BET analysis of nitrogen adsorption isotherms.
Adsorption isotherms obtained with Monte Carlo simulation were successfully compared with experimental results.
The BET surface and the micropore volume where both calculated from the adsorption isotherms.
Kinetic profiles, adsorption isotherms and breakthrough tests were performed.
Nevertheless, it is possible to trace complete adsorption isotherms.
Low-pressure gas adsorption isotherms were carried out volumetrically.
In a preferred embodiment, however, the purification is achieved under linear adsorption isotherms.
The pH effect, contact time and adsorption isotherms were examined in batch experiments.
This part of the freeze-drying process is governed by the material 's adsorption isotherms.
From the analysis of nitrogen adsorption isotherms using the bet method, the specific.
Individual measurements and averages calculated are given. Graphical representations of adsorption isotherms are provided.
This process is shown in hygroscopic adsorption isotherms of Figure 2 for a variety of building materials.
The adsorption isotherms were evaluated utilizing Langmuir, Freundlich, and Temkin models.
As in Table 6, adsorbent performance was measured by CO adsorption isotherms.
Table 1 shows the Freundlich adsorption isotherms generated using a number of different dyes.
Tier 3 - Adsorption isotherms and desorption kinetics/desorption isotherms.
Fig . 20 gives a number of adsorption isotherms of the zeolite.
CO2 adsorption isotherms were measured on various adsorbents at 30°C in a standard volumetric unit.
Figures 1 and 2 show the adsorption isotherms for arsine and phosphine, respectively.
Water adsorption isotherms were collected at ambient temperature and 100°C as presented in Figure 4.
Following these activations, CO adsorption isotherms were measured at 30°C in a standard volumetric adsorption apparatus.
TABLE III, Adsorption isotherms of Eumulgin and ethylhexanol to coal and dirt.
Figure 5 shows the gas adsorption isotherms performed on the evacuated samples of IRMOF-74-I to XI.
FIGS . 2 and 3, the adsorption isotherms of immunoglobulins IgG and antiVIII, C antibodies on different supports.
Fig . 8 are water adsorption isotherms on commercially available Zeolite X.
Fig . 7 are water adsorption isotherms on commercially available Zeolite A.
TABLE IV, Mixture adsorption isotherms of Eumulg, In + ethyl - hexanol to coal and dirt.
The data of adsorption isotherms ( at 25 ¿ c ) were better adjusted by the sips model.
You'll also be interested in:
Examples of using Isotherms
Show more
Isotherms are the lines of equal air temperature
Water absorption isotherms are based on steam uptake
Graphical representations of adsorption isotherms are provided
Examples of using Adsorption
Show more
Adsorption to solid soil phase is not expected
Graphical representations of adsorption isotherms are provided
Adsorption on activated carbon and molecular sieves
