Examples of 'adsorption tower' in a sentence
Meaning of "adsorption tower"
adsorption tower: This phrase refers to a type of equipment used in industrial processes to remove impurities from gases or liquids through adsorption. It is commonly found in chemical engineering or environmental technology contexts
How to use "adsorption tower" in a sentence
Basic
Advanced
adsorption tower
The adsorption tower is usually in a vertically cylindrical form.
This nitrogen generator is equipped at both top and bottom side of the adsorption tower.
The adsorbent in the adsorption tower adsorbs selectively nitrogen.
In the cleaning step, desorbed gas remaining in an adsorption tower is discharged.
The adsorbent in the adsorption tower of the second stage is molecular sieve.
In the decompression step, pressure in an adsorption tower is reduced.
The molecular sieve in the adsorption tower of the second stage adsorbs selectively nitrogen.
In the pressurizing step, pressure in the adsorption tower is raised.
The air enters into the adsorption tower in adsorption step of the first stage.
After the adsorption, the residual gas mixture is removed out of the adsorption tower.
In the adsorption tower calcium hydroxide can be used to enhance the gas take off.
The product gas outlet Ca of the adsorption tower C is kept closed.
Therefore, the additional cleaning can further clean the interior of the adsorption tower.
By far, the adsorption tower a has completed a circulation and can enter into the next circulation.
In the second stage, the adsorbent in the adsorption tower is molecular sieve.
See also
Next, in adsorption tower A, desorption of ethylene from the adsorbent is carried out.
Therefore, unnecessary gas components are desorbed from the adsorbent in the adsorption tower C.
As a result, pressure in the adsorption tower B is raised.
Similarly, desorption of the unnecessary gas component occurs also in the adsorption tower D '.
Well-designed adsorption tower.
The interim gas mixture goes through pipeline G21 and enters into the adsorption tower a.
The adsorbent in the adsorption tower is fine-porous-silicagel.
On the other hand, remaining gas ( Grem ) is discharged from the adsorption tower B.
The pressure in the adsorption tower 1, which has undergone the desorption, is relatively low.
As a result, the pressure in the adsorption tower B ' increases.
At that time, the adsorption tower B ' is undergoing the second cleaning step.
The shift gas goes through pipeline G11 and enters into the adsorption tower A.
At that time, the adsorption tower C ' is undergoing the first cleaning step.
The gas of 2ER ' comes from 2ED □ gas of different adsorption tower every time.
In STEP 2, the adsorption tower 1 communicates also with the desorbed gas collector 8.
The PSA separation apparatus X includes an adsorption tower 1, a product gas buffer tank 2 and a recovery tank 3.
In the adsorption tower C ', a desorption step is continued following the twelfth step ( S12 ).
As shown in Figs . 1 and 3A, the adsorption tower 1 communicates with the crude gas supply 7.
When the pressure in the adsorption tower a reaches the adsorption pressure, close KV-16 and 3a.
When the pressure of the adsorption tower 2a reaches near the adsorption pressure, close KV7 and 23a.
When the pressure in the adsorption tower A reaches the pressure in vessel V8 closely, close KV-14.
You'll also be interested in:
Examples of using Tower
Show more
Somebody in an ivory tower set those priorities
The tower was first conceived by your grandfather
The inside of the tower is not as strong
Examples of using Adsorption
Show more
Adsorption to solid soil phase is not expected
Graphical representations of adsorption isotherms are provided
Adsorption on activated carbon and molecular sieves
