Examples of 'alarm output' in a sentence
Meaning of "alarm output"
Alarm output: The signal or notification produced by an alarm system to indicate a certain event or trigger. It can be in the form of sound, light, or text messages
How to use "alarm output" in a sentence
Basic
Advanced
alarm output
Alarm output for external alarm signal.
Proceed as follows to activate a remote alarm output.
Alarm output for external alarm message.
You need to select alarm output port.
The alarm output functions as an overload alarm.
The red led of the activated alarm output is on.
Select an alarm output to be configured in the.
Analog output types do not have alarm output.
Alarm output can not be triggered by motion detection.
Here is for you to set proper alarm output.
Alarm output relay switching capability.
Select in which situation the alarm output should be activated.
An alarm output can also be used to provide a warning.
This option can not be combined with alarm output.
The alarm output is activated in the following cases.
See also
This switch is used to select the alarm output format.
The alarm output is deactivated in the following cases.
The user can also set up other alarm output.
Alarm output has been open manually.
Overheat detection with alarm output for the heating element.
The alarm output can be activated in case of a flush alarm.
Detection of heating element and device overheating with alarm output.
Alarm output signals are supplied through the coaxial cable.
Protection of heating element and device overheating with alarm output.
As floating alarm output a relay with switching contact is provided.
Here you can define the schedule for the alarm output.
If the alarm output is activated this output can be switched off manually.
Turning the ignition on or opening an entry point will trigger a full alarm output.
Alarm output can be triggered by both alarm input and video loss.
The possibly activated alarm output can be switched off again by the key.
The alarm is automatically reset after the programmed alarm output time has elapsed.
Inverting the alarm output is also possible by means of the communications software.
You can also control the peripheral equipments connected to the alarm output terminals.
The limit value for the alarm output can be programmed in the indicator.
Default setting in the alarm edit dialog for where to send command alarm output.
Connect the alarm output cable to the appropriate terminals as shown in the illustration below.
The camera provides eight alarm inputs and one alarm output to connect alarm devices.
The alarm output can delay for the specified time after alarm stops.
The alarm signal is only supplied from the alarm output connector for the set time.
The alarm output socket is connected to a relay in the IP camera.
See also table below Alarm output logic.
Alarm An alarm output may be connected only to a relay output function OUTx.
Control Support analog alarm signal to specific alarm output channel.
With an active alarm output the red LED on the connecting plate is on.
The message disappears from the LCD display and the eventually set alarm output is deactivated.
The alarm output and red LED can be switched off with this.
The Alarm Out LED is lit when alarm output or internal buzzer is activated.
G Alarm output connector Use this connector to connect the alarm output lines.
Warning and Alarm output.
Alarm Output Sound and flash alarm.
You'll also be interested in:
Examples of using Output
Show more
One output will contribute to this outcome
Illuminates when output is sent to the tray
Output signals common to measuring technology are available
Examples of using Alarm
Show more
From the alarm of hearing your name
I am checking for laser beam alarm triggers
Fire alarm systems with flashing lights
