Examples of 'amount of lubricant' in a sentence
Meaning of "amount of lubricant"
amount of lubricant: This phrase refers to the quantity or volume of lubricating substance used to reduce friction between two surfaces in mechanical systems. It specifies the measure of lubricant needed to ensure smooth operation of machinery or equipment
How to use "amount of lubricant" in a sentence
Basic
Advanced
amount of lubricant
The amount of lubricant should be as low as possible.
Do not hesitate to use a large amount of lubricant.
You add the amount of lubricant you want.
The key thing is to use a small amount of lubricant.
The amount of lubricant can be adjusted individually later on.
Use the correct amount of lubricant.
A sufficient amount of lubricant has been applied at the factory to insure a lifetime of service.
This position requires the least amount of lubricant.
Use a generous amount of lubricant during sex.
The power tool is delivered with proper amount of lubricant.
The correct amount of lubricant at the correct time.
Where the load is expressed in kg and the amount of lubricant in g.
Add a suitable amount of lubricant to all moving parts regularly.
Check that the pneumatic machine is getting the correct amount of lubricant.
Only apply a slight amount of lubricant to the bit shank.
See also
The amount of lubricant provided may depend on a differential pressure over the filter.
I also sprayed a small amount of lubricant on the two small hinges.
The sizes of orifices 42 are selected to provide the desired amount of lubricant flow.
An insufficient amount of lubricant can make it especially painful or injurious.
It would be desirable to closely control the amount of lubricant supplied to the chambers.
The amount of lubricant provided may depend on the level in the sump.
It is easier to handle and control the amount of lubricant reaching the bearing.
Just a small amount of lubricant can make its operation a lot easier.
This system permits close control of the amount of lubricant reaching the bearings.
The small amount of lubricant extracted by conventional SFE indicates strong diffusion limitations.
To check whether there is the right amount of lubricant inside the bearing.
By varying the amount of lubricant supplied, the lifetime of the pump may be extended.
Compared to the prior art, the choice and amount of lubricant are conventional.
Next, use a good amount of lubricant on your penis to develop a partial erection.
At the bottom of the gear case, a necessary amount of lubricant oil is stored.
Optionally a small amount of lubricant is added before filling into capsules.
The thickness of the lubricant coating 52 will depend upon the amount of lubricant applied.
Tabletting with a trace amount of lubricant by external lubrication method is effective.
Meanwhile, each lubricant occluding member 37 retains a large amount of lubricant.
Try using a small amount of lubricant before sex if you are a little dry.
Consequently, the application member 31 is always impregnated with an approximately constant amount of lubricant.
Intermittently supplying the amount of lubricant each time to the antifriction bearing.
The amount of lubricant may vary up to 1 % by weight of the powder composition.
It is a function of the type and amount of lubricant used and the fiber crimp.
The amount of lubricant is constant for the two formulae with 0.3 % of magnesium stearate.
Dividers, dispenses the right amount of lubricant to the application points.
A small amount of lubricant is then introduced for facilitating the re-inverting of elastomeric shell 12.
Before running, inject a proper amount of lubricant into the planetary reducer.
The amount of lubricant can generally vary from about 0 to about 0.8 percent by weight.
When mixing is done, the final amount of lubricant such as magnesium stearate is added.
The amount of lubricant ( e.g., silicone oil on the syringe barrel ) may affect product stability.
The gearbox includes a sump, and the amount of lubricant depends on a level in the sump.
Therefore, fixed amount of lubricant powder I is discharged in the container 35.
If not, stop the motor and add a small amount of lubricant furnished with your saw.
Use adequate amount of lubricant on parts, which are.
You'll also be interested in:
Examples of using Amount
Show more
A small amount of depth of cut can be obtained by
It is obscene to spend that amount of money on a mattress
The amount of these risks is insignificant individually
Examples of using Lubricant
Show more
Do not add lubricant to motor or brush roll
To lubricate the slides with graphite lubricant
Use a cutting lubricant when drilling metals
