Examples of 'lubricant' in a sentence
Meaning of "lubricant"
lubricant (adjective): Refers to something that has a quality of reducing friction or facilitating smooth movement, typically applied to machines or mechanisms to make them work better
Show more definitions
- A substance used to reduce friction between objects or surfaces.
- A personal lubricant.
How to use "lubricant" in a sentence
Basic
Advanced
lubricant
Do not add lubricant to motor or brush roll.
To lubricate the slides with graphite lubricant.
Use a cutting lubricant when drilling metals.
Lubricant level is too high or too low.
The addition of lubricant could cause damage.
Lubricant for the hammers of the rotor.
Shake the graphite lubricant before opening it.
If no lubricant is present contact an authorised service centre.
Do not change engine lubricant while it is hot.
Apply lubricant to a cable when you install it.
Check all fluids lubricant and petrol.
Check lubricant level while lubricant is warm.
Use graphite or dry lubricant to help this.
Ensure lubricant level is to the line on dipstick.
You can use a little lubricant to loosen it up.
See also
Drain lubricant from crankcase and replace.
Foreplay is the best lubricant for conception.
Check lubricant level before each use.
Lubricate gasket with silicone based lubricant.
A continuous fl ow of lubricant is required with these cutters.
Lubricant consumption sequence not needed no yes.
Never use gasoline as a lubricant or as a cleaning agent.
The lubricant is released as the bearing is run in.
It is also used as a lubricant and a cutting fluid.
The lubricant may be a linear oxypropylene homopolymer.
The result is the lubricant consumption rate.
Only the part about the lubricant.
Let the lubricant oil work in overnight.
Never tear or open a shredder lubricant sheet.
Do not use lubricant for fastening bolts.
Lubricator automatically adds lubricant to air line.
Go buy some lubricant and a wrist protector.
Contact your dealer to obtain the lubricant.
Apply refrigerant lubricant to the matching surfaces of.
The threads are already supplied with a lubricant.
Development of the lubricant consumption accumulation schedule.
It excludes any heat removed by a circulating lubricant.
Do not add lubricant to a newly purchased breaker.
Allow sufficient time for lubricant to drain.
Do not add lubricant to motor bearings or brushroll.
Attach the nozzle to the lubricant container.
Engine lubricant through oil fill hole.
Check all fluids lubricant and gas.
Increased lubricant life provides economical efficiency.
The sleeve bearings are delivered without lubricant.
Antiquated machine lubricant barely in use now.
High operating temperatures shorten lubricant life.
Do not force lubricant into grease zerks.
The eyes should be protected by a suitable lubricant.
Dispose of waste lubricant safely and responsibly.
