Examples of 'arbor nut' in a sentence
Meaning of "arbor nut"
Arbor nut: This phrase can refer to a type of fastener used to secure objects onto a shaft or axle in machinery or mechanical devices, typically in the shape of a nut
How to use "arbor nut" in a sentence
Basic
Advanced
arbor nut
Remove the arbor nut and flange.
Do not overtighten the arbor nut.
Tighten the arbor nut securely.
Place the second spanner on the arbor nut.
Reinstall flange and arbor nut and securely tighten.
The arbor nut wings must contact the arbor flange to prevent vibration.
Always tighten the blade arbor nut securely.
Only tighten arbor nut sufficiently to drive the wheel without slippage.
Wrench tighten the arbor nut.
Place the standard arbor nut onto the spindle and tighten it.
Make sure blade is installed correctly and arbor nut is tight.
Remove the arbor nut and flange from the saw arbor by.
Assemble the arbor flange and arbor nut back to the.
Always use the arbor nut that has same thread size as spindle.
Check for any damage and tighten the arbor nut securely.
See also
Thread the arbor nut on the arbor until it is tight against the arbor flange.
Install the outside blade flange and arbor nut to secure the blade.
DO mount the blade solidly and fi rmly, Wrench tighten the arbor nut.
Use wrench to turn the arbor nut toward the front of the saw.
DO mount the blade solidly and firmly, Wrench tighten the arbor nut.
Use the boxend wrench to turn the arbor nut toward the front of the saw.
Remove the arbor nut ( B ) by turning it toward the front of the grinder.
Also make sure the cutting tool, arbor collars and arbor nut are installed pro p erly.
Remove the arbor nut ( Z ) and flange ( BB ) from the saw arbor by turning counterclockwise.
Use the other provided wrench ( G ) to tighten the arbor nut ( E ) toward the rear 0f the saw.
Remove the arbor nut ( C ) with the blade removal wrench D.
Using the arbor wrench, tighten the arbor nut by turning it clockwise see Figure 8.
The arbor nut wings must contact the arbor flange Fig . 17.
Using the wrenches provided ( A, B, Fig 10 ), loosen the arbor nut while stopping the flange against rotation.
Loosen the arbor nut ( J, Fig 14 ) while stopping the arbor against rotation with the locking pin K.
Remove the arbor nut ( Y ) and outer washer ( Z ) and set aside.
Remove the arbor nut ( E ) and flange ( D ) from the saw arbor.
You'll also be interested in:
Examples of using Arbor
Show more
Do not extend arbor bolt tightening wrench
Arbor is a place where people come as they are
Remove the arbor nut and flange
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
