Examples of 'average grain size' in a sentence
Meaning of "average grain size"
average grain size: This term refers to the typical size of grains in a material, such as metal or soil, usually determined through measurement and calculation
How to use "average grain size" in a sentence
Basic
Advanced
average grain size
The average grain size can be determined in a standard manner.
Advantageously the roughness is less than one tenth of the average grain size.
Average grain size.
The intercept and planimetric methods are always applicable for determining average grain size.
The average grain size of polygonal ferrite is determined as described below.
The metal oxides have an average grain size of 8 microns.
The average grain size of ferrite and bainite is a correlative factor.
The resultant product has an average grain size 8 µm linear intercept.
The average grain size of the bcc grains are measured as follows.
Micrographic examination of the grain revealed an average grain size of 70 micrometers.
The average grain size was then determined by the line intercept method.
Another sintered sample was determined to have an average grain size of 19 microns.
The average grain size in the thickness center portion is measured as follows.
The cuprous oxide had an average grain size of less than 2 microns.
The average grain size of the zirconium oxide feedstock is not critical.
See also
The pulps were ground with a grinding stone having an average grain size of 73 mesh.
The average grain size of Y phase is an important factor which characterizes the embodiment.
Once it has been ground, the average grain size does not exceed three millimeters.
The average number of dislocations per grain decreases with average grain size see Figure 3.
The above mentioned average grain size d of Y phase may be measured by the following method.
Optical analysis showed that the ytterbia powder had an average grain size of about 10 µm.
Density and average grain size for MIMAS with addition of Mullite.
In the formula, R is the average grain size.
The average grain size of ferrite is regulated to 2 µm or less.
The alumina particles have an average grain size of 20 microns.
The average grain size may be of the order of 50 nm.
G / l of the luminescent material powder with an average grain size 5 to 8 um.
Preferably the average grain size of the particles is equal to or below 1 um.
This is a powder having particles with an average grain size of 12 nanometers.
The average grain size of the sintered ytterbia was about 40 µm.
The zirconium oxide particles have an average grain size of 0.5 micron.
As an average grain size is reduced, vTrs is lower, that is, toughness is improved.
That value was then multiplied by 1.5 to determine the average grain size.
The resultant plate would have an average grain size of 38 µm linear intercept.
The average grain size in the microstructure is small, preferably approximately 2 - 4 micrometers.
The coating crystals were plates with an average grain size of 10 micrometers.
Therefore, the average grain size of polygonal ferrite is preferably made smaller than 5.0 µm.
Blast furnace slag ( calcium mellilite ) parts average grain size 8 microns.
The average grain size of the compound magnetic particle is not more than 150 µm.
The coating crystals were columnar and the average grain size was 15 micrometers.
However, when the average grain size is less than 2 µm, stress relaxation characteristics are deteriorated.
Na 's beneficial effects include increases in p-type conductivity, texture, and average grain size.
It is generally desired that the average grain size be not larger than 200 µm.
The average grain size ranges between half and 2/3 of the maximum grain size.
The metalcutting tool according to claim 12, wherein said average grain size is 6 µm or less.
Preferably, the average grain size of the material making the substrate is less than 2.5 micrometers.
The post annealed films are nearly smooth with an average grain size of 6 to 10 microns.
The average grain size increased significantly with increasing amount of Y ³ ⁺.
The microstructure is consisted of ferrite having an average grain size of less than 0.5µm.
Their average grain size lies between 7 and 40 nanometers, depending on type.
You'll also be interested in:
Examples of using Size
Show more
Change duct size gradually to minimize turbulence
I do not want a comedian knowing my dress size
Size expressed as minimum and maximum weight
Examples of using Average
Show more
Weighted average life of the repayment period
Just say you will not go average on me
Average freight and passenger wagon availability
Examples of using Grain
Show more
I will grain and water the animals
Always scrub in the direction of the grain
Slice meat across grain in thin slices
