Examples of 'average pore size' in a sentence
Meaning of "average pore size"
average pore size: Refers to the typical diameter or measurement of pores in a surface
How to use "average pore size" in a sentence
Basic
Advanced
average pore size
The average pore size reduced considerably.
The absorbent body has an average pore size therein.
The average pore size is measured as follows.
Each of the layers has a respective average pore size.
Average pore size can be modulated in at least two ways.
Wicks can be described in terms of their average pore size.
The average pore size did not change significantly with temperature.
Each layer of the absorbent structure has an average pore size.
An average pore size and distribution can be calculated from these examinations.
Any difference in the average projected average pore size is now quantified.
The average pore size increased with an increase in the calcination temperature.
A first image may be recorded based on a visual estimate of the average pore size.
An increase in average pore size signals the beginning of another planar absorbent region.
Such a computed pore size can be considered to be one type of average pore size.
The teaching concerning average pore size is inconsistent and not very specific.
See also
Such large pores or voids are excluded from the calculation of average pore size.
The average pore size of the cellulose foam layer can be determined by the compression.
The sintering step also increases the average pore size of silica supports.
The resulting wipes are characterized by planar surfaces and a relatively small average pore size.
Generally, average pore size and density are generally inversely proportional.
The support was silica having high surface área and small average pore size.
Therefore, it is preferred that the average pore size be in the above-mentioned range.
The surge management portion and the topsheet layer each have an effective average pore size.
However, the manufacturer can control the average pore size of the nonwoven material.
If desired, density may be indirectly inferred through a related intensive property, average pore size.
Typically, the average pore size also varies gradually along the relevant cross-section.
The pore size, when used herein is the average pore size.
A selective membrane having an average pore size of at least 10 Angstroms may be employed.
Addition of the pore-forming agent allows regulation of the average pore size.
In the preferred embodiment the average pore size is about 65 nanometers.
The average pore size of the porous metallic matrices before compaction was about 400 µm.
Preferably the membrane or inert porous matrix has an average pore size of about 50 diameter.
The average pore size and number of pores affects the overall porosity of structure 202.
Typically the hydrophobic membrane has pores having an average pore size preferably less than 10 µm.
The average pore size is preferably less than 20Å.
Thus, each planar region is defined by generally decreasing average pore size with increasing depth.
Average pore size is generally determined by the BET-BJH calculation of N2 desorption / adsorption isotherm data.
Conveniently, the molecular sieve has an average pore size of at least 7 Angstrom.
The average pore size of the separation membrane is preferably 0.01 µm to 1 µm.
As a desiccant, silica gel has an average pore size of 24 angstroms.
Further, the average pore size can be less than or equal to about 320 microns.
A structure according to claim 10 having an average pore size of less than 3 µm.
The average pore size within the topsheet was about 80 micrometers ( ECO ).
Preferably, it is a woven polypropylene mesh having an average pore size of about 25 µm.
The loading layer has an average pore size of about 5 to about 30 micrometers.
Clay ( such as Bentonite ) is an example of a material containing an average pore size < 6 µm.
The filter can have an average pore size of about 3 to about 7 microns.
Suitable zeolite molecular sieve adsorbents include 4A zeolites, which have an average pore size of 4 Angstroms.
The base layer has an average pore size of approximately 100 µm.
Said topsheet layer ( 14 ) has a selected effective average pore size therein ;.
You'll also be interested in:
Examples of using Size
Show more
Change duct size gradually to minimize turbulence
I do not want a comedian knowing my dress size
Size expressed as minimum and maximum weight
Examples of using Average
Show more
Weighted average life of the repayment period
Just say you will not go average on me
Average freight and passenger wagon availability
Examples of using Pore
Show more
Every pore on his body is completely sealed
Free of dark green or blackish pore layer
Soil and pore water concentrations are at equilibrium
