Examples of 'belt pulley' in a sentence
Meaning of "belt pulley"
Belt pulley: A mechanical device used to transfer motion or power between shafts by means of a belt or chain
How to use "belt pulley" in a sentence
Basic
Advanced
belt pulley
Heat the belt pulley if necessary.
Remove the timing belt pulley.
Belt pulley can become hot during normal use.
Position belt over belt pulley on the new agitator.
Remove the belt from the deck belt pulley.
The belt pulley is loose.
Place the beft over the belt pulley on the agitator.
Belt pulley control.
Small belt pulley.
Remove the old drive belt and replace the new one over the belt pulley.
Big belt pulley.
Put drive belt on the corresponding belt pulley at the drive.
A drive belt pulley is mounted at each end of the drive shaft.
Place the belt around the belt pulley of the drive motor.
The large belt pulley is rotatably connected to at least one prime mover.
See also
Profile Effective diameter d of the small belt pulley mm.
The result is a belt pulley that meets the requirements of the specific application.
This ended its publication under the Belt Pulley title.
The drive belt pulley is mounted in a position aligned with a lateral frame part.
You may need to readjust the belt pulley 5.
Reinstall belt onto belt pulley and press agitator end cap Belt into place in nozzle.
To prevent burns, avoid touching the belt pulley when.
Pull the tail belt pulley off of the one-way bearing sleave.
Pull the belt off of the engine shaft 's belt pulley.
The drive belt pulley 6 is mounted inside the box of a lateral frame part.
In this embodiment however the conduit 5 is driven by a drive belt pulley system.
To prevent burns, avoid touching the belt pulley when servicing the drive belt.
Begin re-attaching by guiding the rower belt around the rower belt pulley.
The belt pulley 9 must point to the left when the table plate is mounted.
Maximum power and minimum maintenance with the poly-V belt pulley drive.
The belt pulley 8 must point to the right when the table plate is mounted.
However, the rotor rotates considerably faster than does the conveyor belt pulley.
Also check that the drive belt and belt pulley are undamaged, for example, no cracks.
A belt pulley 39 provided with teeth is arranged on the output shaft.
Wheel ( lower band saw roll ) and on the corresponding engine belt pulley.
Fasten the belt pulley ( in the drive package ) to the shaft of the.
Press the pedal ( or the motor 's clutch lever ) until the belt pulley.
The drive device comprises a large belt pulley 1 or chain pulley mounted on a rotatable main shaft 10.
We would have to change the headers, the motor brackets, the belt pulley.
Loosen the belt pulley ( G ) only a little bit, just to remove the belt.
The left-hand end portion of the input member 9 is shaped as a belt pulley.
A drive belt pulley 15 for reeling the flat belts 14 is provided.
The direction of Z axis driving synchronous belt wheel 47 is changed by a synchronous belt pulley 45.
The large belt pulley 1 is connected to a winch drum 8 along the shaft 10.
Mounted on each end of the drive shaft 22 is a drive belt pulley 6.
A belt pulley 109a is shrunk or press fitted onto the input torque transmission sleeve member 109.
Mounted on the drive shaft 20 is a first wheel 21, such as a belt pulley or the like.
Analogously, a motor 45 provided with a belt pulley 47 effects the movement in the X-direction.
The advancing tailpiece of any of the preceding claims, characterized by a single belt pulley ( 90 ).
Covers stock Sportster front belt pulley on 2004 to present models.
You'll also be interested in:
Examples of using Belt
Show more
I am wearing a belt of staples that go into my skin
I think there are actually whales on his belt
He had a belt tied around his neck
Examples of using Pulley
Show more
Rotate the pulley to be sure it spins freely
Check for a damaged belt or damaged pulley
Pulley and idler not in correct adjustment
