Examples of 'pulley' in a sentence
Meaning of "pulley"
Pulley (noun): A simple machine consisting of a wheel on an axle or shaft, used for lifting or lowering heavy objects by means of a rope or chain passing over the wheel.
Show more definitions
- One of the simple machines; a sheave, a wheel with a grooved rim, in which a pulled rope or chain lifts an object (more useful when two or more pulleys are used together, as in a block and tackle arrangement, such that a small force moving through a greater distance can exert a larger force through a smaller distance).
- To raise or lift by means of a pulley.
- A surname.
How to use "pulley" in a sentence
Basic
Advanced
pulley
Rotate the pulley to be sure it spins freely.
Check for a damaged belt or damaged pulley.
Pulley and idler not in correct adjustment.
Check compressor pulley and engine sheave are.
Pulley on the right hand spindle assembly.
A warped or cracked pulley may result in problems.
Pulley made of acrylic including fixing screws.
Remove rear gearcase pulley by clamping locking.
The pulley is sectioned from distal to proximal.
Routed through the pulley when it is replaced.
The pulley went on the block and tackle.
Make sure the pulley is not loose.
Pulley for instability and alternating exercises.
The loosened pulley can then be removed.
Belt must be in groove on top of idler pulley.
See also
Gallow and pulley for pumps extraction.
Remove belt from rear drive pulley.
Use a pulley block for heavy loads.
Loosen the setscrew on the motor pulley.
Push the pulley to see if it will turn.
Check for worn keyway or pulley bore.
Small pulley and two strong magnets.
Excessive wear of the pulley rubber linings.
Sometimes a pulley is used to provide mechanical advantage.
Use tracking lever to center belt on pulley.
Flywheels and pulleys including pulley blocks.
Loosen the setscrew on the engine pulley.
Do not move the pulley during measurement.
A pulley will not handle the weight.
The bolt on the pulley was worn out.
The pulley can not hold longer.
I will just rig up a rope and pulley.
Stepped drive pulley and drive belt.
The pulley is independent of the return spring.
Place new drive belt on gearcase pulley.
Refit the pulley in the opposite order.
We set up a system of bamboo poles and a pulley.
Put the pulley cover on its rests.
Slide belt over the motor pulley.
I am gonna build a pulley to pour my breakfast cereal.
Disconnect motion drive belt at engine pulley.
I can make a pulley to get her out.
Place the belt on the engine pulley.
Rubber chicken with a pulley in the middle.
Let us try putting it on this rope pulley.
Hook the tension pulley arm on the mount.
Install new belt on front gearcase pulley.
Use pulley block or reduce load.
Fit the belt on to the machine pulley.
Loose fan pulley set screw.
