Examples of 'bend angle' in a sentence
Meaning of "bend angle"
bend angle ~ In geometry and mechanics, a 'bend angle' refers to the angle formed between two adjacent segments of a bent object or material
How to use "bend angle" in a sentence
Basic
Advanced
bend angle
A larger wavelength yields a smaller bend angle.
This assures a correct bend angle under the piston.
The bendability can be assessed by the bend angle.
This gives the bend angle of flat materials true accuracy.
Each ratchet stop represents five degrees of bend angle.
The bend angle is varied by the vehicle form control mechanism.
The angle of the tooling is then the desired bend angle.
The bend angle is defined as the supplementary angle of the included angle.
The yield bend moment and yield bend angle are marked on the graph.
As previously noted, a larger wavelength yields a smaller bend angle.
The distance rotation and bend angle after determination is then delivered to a computer output.
This arrangement advantageously provides a visual indication of the bend angle setting at any time.
However, not all small bend angle points can be eliminated.
Strip samples are for measuring linear shrinkage rate and bend angle of the alloy.
Having the same bend angle as that programed by the operator, and.
See also
The same process can be repeated continuously until the desired bend angle is precisely obtained.
Alternatively or additionally, the bend angle of the catheter may be monitored and controlled automatically.
In one embodiment, the two parameters are location and bend angle.
Measuring device for the bend angle of sheet-metal.
The bend angle a, however, may be another angle.
Alternatively, any other suitable bend angle may be used.
To bend a pipe through a bend angle B, a bending die mounted on a bending machine is used.
In a first step, the bend point with the smallest bend angle is eliminated.
The bend angle is measured by using angle gauge 85.
In another embodiment, the device measures location, bend angle and bend rotation.
In other words, the bend angle of green light refracted by condensing lens 225 is intermediate.
The pivoting bending die 32 produces the desired amount of bend angle at each bend.
In this embodiment, the bend angle B of the second end portion 41c is approximately sixty degrees.
Additionally or alternatively, operator 22 may observe the bend angle fluoroscopically.
The bend angle indicator is set at 41.5 ° below the level of the sample table.
The first end portions each have a bend angle not more than forty-five degrees.
Rotary draw bending tooling usually is designed to accept a maximum bend angle of 180 degrees.
In many embodiments the bend angle is 90 degrees or less.
The bending analysis was performed only to a 30 ° bend angle per 15 mm nominal length stent.
Receiving, as input data, a desired bend angle and bending conditions.
