Examples of 'miter angle' in a sentence
Meaning of "miter angle"
Miter angle: The angle between two intersecting lines, typically measured in woodworking or carpentry for cutting precise angles
How to use "miter angle" in a sentence
Basic
Advanced
miter angle
Loosen the miter angle lock knob.
Refer to the lower table for the miter angle.
Only the miter angle is adjusted.
Use the chart to select the proper miter angle.
Position the miter angle scale and base.
Push down on the miter lock handle to lock the miter angle.
Adjust the miter angle on the machine head.
Always secure the turntable by tightening the miter angle lock knob.
Set the miter angle to the nearest whole degree.
Move with the handle to the miter angle to make the cut.
The miter angle and bevel angle are dependent upon each other.
We now not only need a miter angle but also a distance.
Lift the miter lock lever and select the desired miter angle.
The digital miter angle readout shows the selected angle.
Secure the turn base firmly at the position of the desired miter angle.
See also
This knob locks the blade miter angle securely into place.
Allows detent action to be locked out allowing for micro adjustments to any miter angle.
Secure the turn base at right miter angle fully by means of the grip.
The miter lock knob locks the miter saw table at any desired miter angle.
Tighten the miter angle lock knob to secure the table before making a cut.
A compound miter cut uses a combination of a miter angle adjustment and bevel angle adjustment.
Set the miter angle and the bevel angle required before making the first cut.
A compound miter is a cut made using a miter angle and a bevel angle at the same time.
Miter angle Thickness of wood facing.
Rotate miter arm to required miter angle other than 0 degrees.
Miter angle 0 adjusting bolts are located in four positions.
Install a new, unused platform to the saw after presetting the desired miter angle.
Small changes in the miter angle can be made without affecting the bevel angle.
Follow the horizontal intersecting line to either side to get miter angle setting on saw 42.
Minute changes in the miter angle can be made without affecting the bevel angle.
Secure the blade at 0 bevel angle and the turn base at left miter angle fully.
Minute changes in the miter angle can be made without adjusting the bevel angle.
Secure the blade at 0 bevel angle and the turn base at right miter angle fully.
Check that the miter angle scale and the tip of the “ ” mark are properly aligned.
Refer to the previously covered " Adjusting the miter angle.
Loosen four miter angle 0 adjusting bolts by turning counterclockwise from the underside of the table.
Positioning for adjusting the miter angle Fig . 9.
The miter angle can be set in a range from 0 to 45.
Refer to the previously covered ‘ ‘ Positioning for adjusting the miter angle.
Bevel angle Miter angle Max . cutting.
Refer to the table ( C ) for the miter angle.
Set the miter angle at 31.6 degrees either right or left depending on the cut.
Set the tool at 0 or 45 miter angle and make sure.
For 90 corner, set the miter angle using chart below.
Adjusting the miter angle Fig . 8.
Position in Fig . 34 Miter angle Finished piece.
