Examples of 'bend test' in a sentence
Meaning of "bend test"
bend test ~ The phrase 'bend test' is a technical term used in various industries, such as engineering and manufacturing. It refers to a procedure or method used to assess the flexibility, ductility, or strength of a material by subjecting it to bending forces or stress
How to use "bend test" in a sentence
Basic
Advanced
bend test
Tensile and bend test pieces.
Free bend test deformation is a measure of crush resistance.
Mandrel diameter in the bend test.
The bend test is a new phenomenon.
Pliability was investigated through a bend test.
Assessment of bend test results.
The test method is a three point bend test.
The bend test results were improved by annealing the weld.
Coating flexibility was evaluated in triplicate by a wedge bend test.
The wedge bend test is conducted to determine the flexibility.
Samples of each variable were subjected to a wedge bend test.
Bend test diameter of.
Retesting is permitted for the tensile and bend test.
Bend test on steel.
Notched weld bend test.
See also
Bend test attachment.
Guided root bend test.
The bend test is shown to be an equivalent test to the flattening test.
The fracture toughness was measured in a four point bend test.
Reverse bend test.
The bend test was shown to be an equivalent test to the flattening test.
Face bend test.
A bend test was used to measure propensity to crack during bending or ductility.
Normal bend test.
The side bend test was performed according to a procedure described above.
Tongue bend test.
The mechanical properties were determined using a three point bend test.
Side bend test.
The technique used to measure the transverse rupture strength comprised a three point bend test.
Nokia bend test.
Free bend test deformation is determined using a test setup as shown in Fig.
Diagram of bend test.
The four point bend test is run such that the coating is placed in tension.
Illustration of bend test.
Bend test on a longitudinal weld, the inner surface in tension.
Free bend test.
The panels were tested in a Zero T bend test.
Bend test on a longitudinal weld, the outer surface in tension.
Transverse bend test.
Bend test on a circumferential weld, the inner surface in tension.
Poor resistance to MEK rub and poor bend test performance.
Bend test on a circumferential weld, the outer surface in tension.
One tensile test piece - one bend test piece.
Bend test on steel sheet and strip under 3 mm thick.
In some cases, flexibility was also judged by the wedge bend test.
Bend test diameter of former d n e, where e is the thickness of the test piece.
Example 1 gives the standard procedure for performing a four point bend test.
The 3-point bend test requires production of a parallel sided rectangular bar of ice confection material.
The flexural mechanical properties of the composites were tested using a 3 point bend test method.
The bend test shall be carried out in accordance with EURONORM 6.
You'll also be interested in:
Examples of using Bend
Show more
Do not bend or twist the power cord
Be careful not to twist or bend the blades
Bend your knees and be stiff as a board
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
