Examples of 'bending angle' in a sentence
Meaning of "bending angle"
Bending Angle: The degree or measure of deviation from a straight line or plane, typically used in geometry or physics to describe the curvature or inclination of an object. This term is commonly used in technical or scientific contexts to quantify the amount of bending or flexing in a structure
How to use "bending angle" in a sentence
Basic
Advanced
bending angle
The bending angle is explained below.
The maximum dynamic knee bending angle shall not exceed.
The bending angle is predefined when the stent is manufactured.
Apparatus and method for measuring the bending angle of a sheet.
Min bending angle.
The bending test is then stopped and the bending angle measured.
In this case the bending angle is thermally shaped.
See how changing from air to water to glass changes the bending angle.
The bending angle is limited by the configuration of the ball joint connection.
Transducers shall be fitted to measure knee bending angle and knee shearing displacement.
Said bending angle is measured in a reference plane aligned perpendicular to the bending line.
The life ratio of the tooth root increases as the bending angle a increases.
The bending device enables the bending angle obtained in the workpiece to be monitored continuously.
High performance machine with thermal compensation for programmed sheet bending with constant bending angle.
There are presses which enable the bending angle to be measured during the bending process.
See also
The bending angle may be inverted into refractivity profiles of the atmosphere against height.
Surface edges are then calculated using a value of bending angle to group elements into surfaces.
The bending angle is larger than that of the other Example tires.
The angle B is referred to as the bending angle.
The bending angle of stress whitening is determined as follows,.
The stroke-length can then be transposed to a corresponding bending angle.
Slowly reverse, the set bending angle can be corrected while reversing.
Furthermore, the resistance will be different when the bending angle is different.
The bending angle should be constant throughout the length of the workpiece, and.
As a consequence, the critical bending angle and the fracture strain are too low.
Sheet-bending press incorporating a device for continuous monitoring of the bending angle.
In this case, the bending angle correspond to a contact angle with the hearth rolls.
Figure 5 illustrates the influence of sulfur on the bending angle of parts after hot stamping.
For instance, fiber optic cable is often specifically designed to allow for a maximum bending angle.
This achieves a stable bending angle after bent portion 55 springs back when the hand is released.
Multiple turns of the same ventilation channel steel 12 have the same bending angle θ.
The elastic bending angle ranges are summarized in Table 4.
Product by NC control, hydraulic drive, with prefabricated different bending angle.
ACB, or the Automatically Controlled Bending angle sensor, is integrated into the tooling.
A Protable tool for bending hard tube . Can help you easlily control the bending angle.
Bending angle is only 4cm.
Can be bend horizontally only, bending angle is only 8cm.
Preferably, the bending angle of the engagement portion is greater than 90 degrees.
For vehicles that have a lower bumper ., especially the bending angle.
Application: bending angle.
However, the bending angle of the entire second intake pipe 46 is also not particularly limited.
The time in the environment for cracking or breaking at a 90 ° bending angle is noted.
The bending angle ( a ) of each sample is measured after unloading and thus after specimen spring-back.
Alternatively, the curvature might be so that the bending angle formed is greater than 90 °.
This bending angle is advantageously greater than 90 °.
The flexible part 184 is compressed to form the slightly small bending angle and inserted.
A bending angle of about 15 degrees between adjacent disks 212 is typical in these embodiments.
Can be bend horizontally along with PCB only, bending angle is 8cm.
As the bending angle a exceeds a value of 6.0, then the life ratio becomes greater than 1.
The bending stiffness B was measured at a bending angle a von 30 ° as bending force BF in mN.
You'll also be interested in:
Examples of using Bending
Show more
Steam bending is a traditional process steeped in history
Exceptional inverse bending test fatigue strength
Bending over in them tight little clamdiggers
Examples of using Angle
Show more
The angle can be read on the scale jj
Only place he can angle a shot at you
The angle would not make sense
