Examples of 'bending resistance' in a sentence
Meaning of "bending resistance"
Bending resistance: Refers to the ability of a material or structure to withstand bending or deformation without breaking. This phrase is commonly used in engineering, construction, or material science contexts to measure the flexibility or strength of a material
How to use "bending resistance" in a sentence
Basic
Advanced
bending resistance
Bending resistance is the strength measured at a deflection.
Bending stiffness is calculated with bending resistance.
The bending resistance decreases after calendering.
These properties are generally improved by increased bending resistance.
Bending resistance to conventional reinforcement requirements.
Arrangement for adjusting the bending resistance of an instrument arm.
The bending resistance of the boot is therefore relatively low.
The stiffness of the flexible extensions is measured as a bending resistance.
Such back bending resistance is accomplished in two ways.
There is thus an incentive to decrease grammage while maintaining bending resistance.
Ultimate bending resistance.
Bending resistance is also needed for the protective properties of a package exterior.
The upper limit of the bending resistance is not specifically defined.
The glass or stainless steel filaments have a low bending resistance and break.
High bending resistance promotes good runnability on the packaging machine.
See also
There are other disadvantages that stem from the bending resistance of the web.
The bending resistance in longitudinal direction is determined by the continuous part of the insert.
The work demonstrated that RDCs also have considerable tension and bending resistance.
The bending resistance of the specimen was measured using a cantilever tester in the same environment.
The legs should have a significantly higher bending resistance than said spring member.
Thereby the low bending resistance of the vibration-isolating insert is warranted.
The combination of the first and second plies gives the paperboard high bending resistance.
Such features render the pulling strength and bending resistance of such skeleton belt improved.
However, an information page should have good bending properties as well as good bending resistance.
In packages, high bending resistance promotes rigidity and strength.
The compound device stiffness is sufficient to provide the expected bending resistance under expected loading.
The bending resistance was evaluated using the cantilever-bending test with a universal testing machine.
This will increase the bending resistance of the self-mailer.
However, the inner liner does not have a sufficient bending resistance.
Equations for Mpc, the bending resistance at B, depend on the type of cross section.
The Av-Value is defined and used to calculate the bending resistance of a drawbar.
The difference in the bending resistance is more preferably 3 to 15 mm.
On the other hand, bigger tabs typically have higher bending resistance.
Also, the bending resistance index, which is correlated to bending stiffness, is at a good level.
For example choosing the dimensions such that a bending resistance of 20 kg is achieved is possible.
Accordingly, the structures of Figures 1-5 would typically be used if increased bending resistance is required.
In the CD, the non-indexed bending resistance is less important.
Here, the profile of the tie-rod 26 is adapted for better bending resistance.
The relationship between bending resistance and shear resistance is shown in Fig . 4.7.
Let me forgive councilors and officials of this title, thinking of bending resistance and heterogeneity.
Further, the absolute ( non-indexed ) bending resistance value is lower . Drop testing.
After cooling, the stiffness obtained is controlled by measuring the bending resistance of the structure.
It 's 35 % stronger for extension and bending resistance than normal fibreglass.
Gurley Stiffness, The Gurley Stiffness test measures the bending resistance of a material.
Thus, the user can rotate tubular member 82 to modify the bending resistance of projection elements 88.
You'll also be interested in:
Examples of using Bending
Show more
Steam bending is a traditional process steeped in history
Exceptional inverse bending test fatigue strength
Bending over in them tight little clamdiggers
Examples of using Resistance
Show more
National resistance to the occupation was therefore legitimate
This must result in a resistance value of approx
Resistance to surface damage by fine particles optional
