Examples of 'bias voltage' in a sentence
Meaning of "bias voltage"
Bias voltage refers to a fixed voltage that is applied to a device or circuit to establish a specific operating condition. It is used to control or stabilize the behavior of electronic components, such as transistors or amplifiers, by setting their current or voltage levels
How to use "bias voltage" in a sentence
Basic
Advanced
bias voltage
A bias voltage was applied to the substrates to be coated.
The photomultiplier tube bias voltage is set.
Bias voltage in response to a change in ambient temperature.
The biasing ring is connected to a bias voltage generator.
The bias voltage is then zero.
The contact is connected to the bias voltage generator.
A bias voltage is applied to one or more exposed electrodes.
Their capacitance decreases as the reverse bias voltage increases.
And there is bias voltage set up on the harness clasp.
They are coincident for a certain value of the bias voltage.
No bias voltage is applied to the substrate during the deposition.
Detection of a particular wavelength band is obtained by switching a bias voltage.
This bias voltage is determined by means of a first bias circuit.
It is also contemplated that the bias voltage may be pulsed.
A bias voltage may be generated using a digital counter or accumulator.
See also
A particularly preferred developing bias voltage will now be described.
The substrate bias voltage can be increased continuously or stepwise.
Thermopiles also do not require a source of bias voltage or current.
The value of the bias voltage is constant and predefined.
This voltage difference can be used to change the bias voltage.
A desired bias voltage may be realized by means of an additional circuit.
Increase in bias voltage.
No bias bias voltage migration of the oxide ions from the.
This may result in oscillation between two bias voltage extremes.
The bias voltage variations are imposed by the external electrical system.
The ratio thereof determines the eventual desired bias voltage.
The reverse bias voltage remains if no other phenomenon displaces charges.
The ratio of each phase can be controlled by a bias voltage level.
The bias voltage can be provided by a bias voltage power supply.
In one embodiment a capacitor is used for sustaining the bias voltage.
An identical predetermined bias voltage is first applied to all probe electrodes.
A bias voltage applied to the terminals of the sensor leads to a photocurrent being generated.
The actual measuring signal of the sensor is added to this bias voltage.
The first bias voltage source may be configured in various ways.
The meniscus is shown in its advanced position when a bias voltage is applied.
The variable bias voltage decreases as the amplitude of the oscillations increases.
The value of this ratio can be regulated by the bias voltage value.
The phase bias voltage can be any value up to the switching voltage.
More than one combination of attenuator and bias voltage resulted in distortion cancellation.
The bias voltage may be generated and provided by a bias voltage source.
Based on a resonant multilevel model we also calculate the current against bias voltage.
This increment of the bias voltage can be for example be performed gradually.
The output signal of the device determines the value of the bias voltage.
The optimum detector bias voltage can shift dramatically with temperature changes.
The other elongated elements are electrically coupled for receiving a second bias voltage.
The value of the bias voltage applied by the drive units is constant and predefined.
The voltage across the capacitor varies above and below the bias voltage.
Said positive bias voltage pulse component preferably has an amplitude of only a few volts.
These stages further need to have a negative bias voltage on their gate relative to ground.
A bias voltage was applied with a polarity appropriate for the silicon to form the cathode.
You'll also be interested in:
Examples of using Bias
Show more
This bias can result in inefficient projects
A little bit of a bias but nice balance
Bias is often alleged but seldom proven
Examples of using Voltage
Show more
Voltage drop due to use of extension cable
Information on the voltage is on the rating plate
Voltage measure switch for phase voltage
