Examples of 'bit shank' in a sentence
Meaning of "bit shank"
The term 'bit shank' is not a commonly used phrase in English. It does not have a specific or widely recognized meaning or context
Show more definitions
- The end of a drill bit that is held by the chuck of a drill
How to use "bit shank" in a sentence
Basic
Advanced
bit shank
Counterclockwise and insert the bit shank.
The bit shank must be clean.
Clean and grease the bit shank.
Be sure the bit shank and chuck jaws are clean.
Only apply a slight amount of lubricant to the bit shank.
Clean the bit shank before installing the bit.
Lubricate the thread of the core bit shank to facilitate.
Insert the bit shank into the collet as follows.
The collet should be clamped to a solid part on the bit shank.
Clean and insert the bit shank into the collet.
Rotate the collar of the chuck clockwise to tighten the drill bit shank.
Clean the bit shank and apply bit grease before.
Be sure that the collet is not clamped to a fluted section on the bit shank.
Insert the bit shank into the tool holder locking.
Pull back the tool holder locking sleeve and insert the bit shank.
See also
Insert the bit shank into the tool holder as far as it will go.
Push out the jammed material via the core bit shank with appropriate stick.
Clean the bit shank and apply bit grease before installing the bit.
Guide plate Center pin Core bit Core bit shank.
The material of the drill bit shank may for example be a tungsten carbide.
By turning the collar of chuck 2 clockwise the jaws tighten the drill bit shank.
Bit grease Clean the bit shank and apply bit grease before installing the bit.
If the bit will not remove easily, lightly tap the bit shank with a wrench.
Insert the bit shank into the tool holder 5.
NOTE, Never tighten a collet assembly without inserting a bit shank of the proper size.
If the wrong size bit shank is used, the collet may break.
Pull back the locking sleeve ( p ) and insert the bit shank.
Coat the bit shank head beforehand with a small amount of bit grease about 0.5 -1 g.
Open the chuck by turning the sleeve ( 9 ) counterclockwise and insert the bit shank.
Core bit shank Applied to core bits above 38 mm Applied to core bits below 35 mm.
You'll also be interested in:
Examples of using Bit
Show more
A little bit over my head right now
At least the baby puts up a bit of a fight
I was in a bit of a jam and he came through for me
Examples of using Shank
Show more
Insert blade shank from the front
The shank may be totally or partially threaded
Drill pilot and shank clearance holes
