Examples of 'blade bolt' in a sentence
Meaning of "blade bolt"
blade bolt: a type of fastening device used to secure a blade onto its handle or mounting
How to use "blade bolt" in a sentence
Basic
Advanced
blade bolt
Check that the blade bolt is tight.
Turn blade bolt counterclockwise to tighten.
Use spanner to loosen blade bolt by turning.
Tight en blade bolt or replace blade adapter.
Install and tighten blade bolt securely.
Tighten blade bolt or replace blade adapter.
Hold firmly and tighten blade bolt firmly.
Turn the blade bolt clockwise to loosen.
The recommended torque for the blade bolt is.
The special blade bolt is heat treated.
Tighten the screws on the blade bolt cover.
Remove blade bolt by turning coun ter.
Hold firmly and tighten blade bolt firmly with a.
A loose blade bolt could cause difficult starting.
Remove the front end blade bolt cover screw.
See also
Tighten blade bolt firmly with the spanner provided.
Fasten the philips screw on the blade bolt cover.
Withdraw the blade bolt from the bottom.
And replace the lat washer and blade bolt.
Be sure the blade bolt is tight.
Rotate lower blade guard up and loosen blade bolt cover.
Tighten the blade bolt and turn it clockwise.
Place outer blade flange and blade bolt on spindle.
Tighten the blade bolt as firmly as possible by hand.
Press the spindle lock button and replace blade bolt.
Renew the blade bolt if necessary.
Replace the lower blade guard and the blade bolt.
Remove blade bolt by turning counter.
The motor shaft and thread the blade bolt in finger tight.
Torque the blade bolt down using a torque wrench to.
Place the blade flange on the spindle and hand tighten the blade bolt.
Tighten the blade bolt securely.
The blade bolt and washers were specially designed for your saw.
Remove the upper blade bolt with the wrench.
The blade bolt and washers were specially designed for this tool.
Be sure to securely tighten the blade bolt before continuing work.
Tighten blade bolt securely using the provided blade wrench.
Install the blade using the blade bolt and special washers.
Rotate blade bolt cover up and back to expose the blade bolt.
Only use the replacement blade and blade bolt specified for this product.
Replace the blade bolt cover and the lower blade guard in position.
Place the blade fl ange on the spindle and hand tighten the blade bolt.
Remove the blade bolt and outer washer.
Disconnect your saw from the power supply and securely retighten the blade bolt.
Remove the blade bolt and outer blade flange.
Reinstall the outer arbour collar and firmly tighten the blade bolt by turning clockwise.
Remove the blade bolt and outer blade fl ange.
Depress the spindle lock button and rotate the blade bolt until the spindle locks.
Insert the upper blade bolt and tighten securely with the wrench provided.
Press the spindle lock button and rotate the blade bolt until the spindle locks.
You'll also be interested in:
Examples of using Bolt
Show more
Remove the bolt with a socket wrench
Bolt or clamp the saw to its support
Stiffener bracket bolt must be kept tightened
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
