Examples of 'blade bolts' in a sentence
Meaning of "blade bolts"
blade bolts - These are mechanical components used to secure the blades of a rotor or turbine to a hub. This phrase is often used in the context of aviation, wind turbines, and other machinery with rotating blades
How to use "blade bolts" in a sentence
Basic
Advanced
blade bolts
Check that the blade bolts are tight.
Blade bolts are heat treated.
Tighten all three blade bolts securely.
The blade bolts are specially designed for this purpose.
Make sure that the blade bolts are well tightened.
The bolt holes are adapted to receive the blade bolts.
Retighten the blade bolts using a torque wrench.
Cutting edges of the blade and check the tightness of the blade bolts.
Never use blade washers or blade bolts that are defective or incorrect.
Place a wooden block between two cutterbar discs to prevent disc rotation while tightening blade bolts.
Always check that the blade bolts are not worn or damaged.
The blade components may comprise blade structure, blade bearings and blade bolts.
Always check visually that the blade bolts are not wearing or damaged.
Remove blade bolts by turning counter-clockwise.
Before using, always visually inspect to see that the blades, blade bolts and cutter.
See also
Check that blade bolts are tight see Maintenance chapter.
If you have a machine fitted with BBC then you must remove both blade bolts X3.
Install the blade bolts into blade adapter and Blade.
Prior to operation, check cutter blades, blade bolts and cutter assembly for wear or damage.
If the blade bolts are not tightened enough, they could loosen or come out.
Be sure that the blade bolts are tightened well, as.
The blade bolts 9 enter their corresponding bolt holes 11 shortly after the protruding blade bolts 12.
Before use, ensure blade bolts are tight and blades are properly aligned.
If the blade bolts are too tight or too slack, they may break or unscrew.
That the blades, blade bolts and cutter assembly are not worn or damaged.
That the blades, blade bolts and cutter assembly are not worn or dam aged.
Install the blade bolts into Blade Brake / Clutch.
You'll also be interested in:
Examples of using Bolts
Show more
Heads of bolts go on the inside of the cart
Fasten with the previously removed bolts
Push bolts into holes on back of handle
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
