Examples of 'blade holder' in a sentence
Meaning of "blade holder"
blade holder: This term refers to a device or mechanism designed to securely hold a blade in place, typically in tools or equipment such as knives, razors, or cutting implements. It ensures the proper alignment and stability of the blade during use, enhancing safety and precision in cutting or slicing tasks
How to use "blade holder" in a sentence
Basic
Advanced
blade holder
Tighten the blade holder clamp screw.
The slider is mounted on the blade holder.
Clean the saw blade holder regularly.
Blade holder is free of material residue.
Periodically check blade holder hardware and.
The blade holder is removably mounted to the handle.
Which is connected to the blade holder as described below.
Loosen blade holder by turning it clock wise and remove.
Inserting the blade into the blade holder.
Keep the blade holder clean.
Blade is not clamped tightly by the blade holder.
The reciprocating blade holder can pinch your fingers.
The blade is held by a magnet in the blade holder.
Place the blade holder over the nozzle outlet.
Blade not secure in blade holder.
See also
Periodically check blade holder hardware and resecure if necessary.
Place the saw blade in the blade holder.
Lift the blade holder or disk holder from the driver.
Delivered without the blade holder.
Turn the blade holder over with blade guard attached.
Sold without the blade holder.
The blade holder is typically formed of a machined or molded plastic material.
A drive reciprocates the blade holder.
Gently replace the blade holder and ensure that it is engaged properly.
The blade is mounted slidably in the blade holder.
The small hooks in the blade holder should point up.
Check the blades for damage or on the blade holder.
Therefore the entire the blade holder must be exchanged.
It serves as the support structure for the blade holder.
Insert the blade into the blade holder as far as it will go.
Pressure fluid is provided by apertures in the doctor blade holder.
The cartridge includes a blade holder and a shield.
This machine is equipped with a particularly accurate saw blade holder.
Insert the clamp into the blade holder while rotating.
The passage generally is perpendicular to the slot in the blade holder.
Insert the clamp into the blade holder while rotat.
Saw blade holder as far to the left as possible and hold it there.
Remove the old blade from the blade holder.
Periodically lubricate LockJaw blade holder with a dry lubricant such as graphite.
Yes blade holder is in the heart of how the world depends on how.
Align the hole in the upper blade holder with the.
The blade holder can be an elastic blade holder or a rigid blade holder.
Place the shaving head onto the blade holder again.
Shows the same blade holder when moving over an uneven base.
Turn the clamping ring of the saw blade holder as far.
A blade holder applies an intermediate portion of the blade to the surface being doctored.
Ensure proper operation of the saw blade holder by applying a suitable lubricant.
The blade holder preferably includes means for retaining the blade.
Remove the bolts on the blade holder with the hex wrench.
The saw blade can not be removed from the blade holder.
You'll also be interested in:
Examples of using Holder
Show more
Support file holder on cutter top plate
Holder advertising material itemnumber price per
This battery holder part is not waterproof
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
