Examples of 'blade rotation' in a sentence
Meaning of "blade rotation"
This phrase describes the movement or spinning of a blade, typically in a circular or rotational motion. It implies the rotation of a sharp-edged object, often seen in tools or machinery
How to use "blade rotation" in a sentence
Basic
Advanced
blade rotation
Both status lamps for blade rotation are on.
The blade rotation is very dangerous.
When you move the blade rotation control.
Shut down blade rotation by turning the switch the neutral position.
Check the operation of the blade rotation control.
Quickly stops blade rotation when the bail switch is released.
Otherwise unintentional blade rotation may.
A constant blade rotation speed will result in a very smooth cut.
Wind turbine rotor blade rotation.
Start blade rotation by turning the switch towards the lamp that is on.
Release the safety lever to stop the blade rotation.
Doppler effect and blade rotation are taken into account.
Note the direction of motor and saw blade rotation.
Blade rotation tends to force air in the general direction of the fan axis.
A red arrow on the lid marks the blade rotation direction.
See also
Use the blade rotation control to start and stop the rotation of the blade.
This valve opens again when the blade rotation is started.
Move the blade rotation control to the ENGAGE position.
Switch the unit back off after one blade rotation.
Move the blade rotation control to the DISENGAGE position.
Which helps maintain a constant blade rotation speed even under load.
Wait for fan to stop before reversing the direction of blade rotation.
This is created by the combination of blade rotation and forward movement of the boat.
In the preferred embodiment the skew direction is opposite the blade rotation.
Never apply side pressure to stop the blade rotation after switching off the saw.
The force pulls the machine in the opposite direction to the blade rotation.
Make sure the blade rotation control is in the DISENGAGE position.
The overall fluid flow direction also defines a blade rotation direction.
Move the blade rotation control to the DIS.
Remove the blade from the cut and start the blade rotation.
To prevent an injury, the blade rotation control must operate correctly.
A first of these alternatives is to synchronize the data transmissions with the blade rotation.
To switch off the blade rotation, turn the blade rotation.
Wait for the fan to stop before reversing the direction of the blade rotation.
Stop the blade rotation before crossing non-grassy areas.
The pickup coil in the magnet converts the turbine blade rotation into pulses.
In normal usage, the blade rotation control will not require an adjustment.
Mow for a short distance and again check the operation of the blade rotation control.
The speed of blade rotation was fixed at 30rpm to ensure a steady work input.
Push the emergency stop on the power pack and check that the blade rotation stops.
Move the blade rotation control ( 1 ) to the ENGAGE position to rotate the blades.
The machine cuts out / does not start blade rotation.
Move the blade rotation control ( 1 ) to the DISENGAGE position to stop the blades.
The switch trigger and the lock-out button must be depressed simultaneously to begin blade rotation.
Figure 8 Move the blade rotation control to the ENGAGE position 2.
Season Slide Switch - Changes direction of blade rotation.
Figure 8 Move the blade rotation control to the DISENGAGE position 1.
The centrelines are radial directed towards the blade rotation axis 10.
Use the blade rotation control ( 1 ) to engage the blades.
Each of the tabs 140 includes two contact parts, depending on the direction of blade rotation.
You'll also be interested in:
Examples of using Rotation
Show more
In left rotation the safety clutch is deactivated
I would estimate a half rotation before it is over
Its rotation is guided by the drive shaft
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
