Examples of 'blade tension' in a sentence
Meaning of "blade tension"
Blade tension refers to the pressure or force applied to the blade of a cutting tool, such as a saw or knife. It is essential in ensuring the optimal performance and efficiency of the tool, as the right tension helps maintain the blade's accuracy and cutting ability
How to use "blade tension" in a sentence
Basic
Advanced
blade tension
Blade tension lever is under spring pressure.
Electronic monitoring of the hydraulic blade tension.
Blade tension too high or too low.
This releases the saw blade tension.
Saw blade tension spring is worn or defect.
Check adjustment at the blade tension indicator.
Turn blade tension knob clockwise to tension blade.
Automatic indication of blade tension using micro switch.
Blade tension was set at the factory.
Confirm that the blade tension is set properly.
Maintain control of lever when releasing blade tension.
Make sure the blade tension is properly adjusted.
Lever when releasing blade tension.
Adjustments to blade tension can be made at any time.
Replace with a new blade and adjust blade tension.
See also
Loosen the blade tension by turning the blade.
Relax the saw blade with the blade tension knob.
Check the blade tension and adjust if necessary.
With the quick release lever the saw blade tension is released.
Check the blade tension before any operation.
Ar blade against the flange of blade wheel and test the blade tension.
Automated blade tension adjustment system.
Adjust the blade guides and support bearing after each blade tension and tracking adjustment.
Release the blade tension and remove the blade.
Ask your Regional Sales Manager for a complete list of blade tension recommendations.
Loosen the saw blade tension by turning the knob.
Reduce side pressure on blade ; check blade tension.
Bandsaw blade tension indicator.
For guns with cutters, adjust anvil to blade tension.
Set the saw blade tension correctly with the knob.
When the machine is not in use, release the blade tension.
Readjust the blade tension and begin the inside cut.
Switch off the motor, tighten the blade tension knob.
Loosen or tighten the blade tension by turning the blade tension knob.
When the band saw is not in use, relax the blade tension.
Maintain proper adjustment of blade tension blade guard before operating saw.
Hinge bolt with pin-set nut for proper blade tension.
Make sure that the blade tension and blade tracking are properly adjusted.
Install blade through the hole in the workpiece ; adjust the drop foot and blade tension.
Two wheels on both sides of the blade tension the blade during cutting.
Set the blade tension gauge to correspond with the width of the blade in use.
Keep in mind that too little or too much blade tension can cause blade breakage.
Release blade tension when the saw will not be used for a long period of time.
This in turn allows for greater blade tension and thus a higher rate of cutting.
Turn the blade tension knob clockwise until the blade has the desired amount of tension.
That means you can easily adjust the blade tension of the Swing Blade.
Make sure the blade tension lever is moved fully to the right 3.
Release the arm after attaching the blade and set the blade tension with the knob 3.
Loosen the saw blade tension further with the knob 3 if necessary.
Now tighten the blade with the blade tension Knob 9.
You'll also be interested in:
Examples of using Tension
Show more
The tension between them was just wonderful
And constant shoulder tension creates a hunchback
Belt tension is controlled by means of an automatic tensioner
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
