Examples of 'blade tip' in a sentence
Meaning of "blade tip"
Blade tip: This phrase refers to the pointed or sharpened end of a blade or cutting tool. It indicates the extreme edge of the blade, often associated with precision or the area of contact during cutting or slicing
How to use "blade tip" in a sentence
Basic
Advanced
blade tip
The shock is moving the blade tip.
Blade tip loss factor.
Measure this distance from blade tip to ceilng.
Blade tip balance weight.
Inner surface of the second blade tip part.
Blade tip cover.
This enables calculation of the blade tip angle.
Blade tip timing.
These blocks are located close to the blade tip.
The blade tip angle may then be calculated as described previously.
The attack angle at the blade tip is called ac.
The blade angle remains relatively constant at the blade tip.
Shrouded blade tip.
The blade tip angle is calculated in the same manner as described previously.
Measure the distance from the front of the blade tip to.
See also
The coating on the sharp edge blade tip was found to be subject to failure.
This improves the accuracy of the determined blade tip angle.
The blade tip is secured to the blade after the tightening of the bolts.
And heavy impact can result in the blade tip being folded aside.
The blade tip guard prevents damage to the property and the blades.
A surprising finding was that noise from the blade tip is of minor importance.
Variable length blade tip molds and methods for manufacturing the same.
This clearance will be referred to in the following as the blade tip clearance.
The missing blade tip leaves an opening into the top of the blade.
This motion is important to adjust the blade tip on varying surface profile.
The adhesive material is also used to bond the rods to the blade tip.
System development to determine blade tip running clearances in a jet engine high pressure compressor.
Replace the upper knife only when the knife blade tip is damaged.
Blade tip twist reduction diminishes the tip vortex and the induced loss.
A running tool may bounce uncontrollably if the blade tip contacts any surface.
Improved cooling of the blade tip including the pressure side tip rib is obtained.
Ground and the distance from the outside right blade tip to the ground.
The blade tip clamp arrangement can comprise one or more such pairs of lugs.
The deck is properly leveled when both blade tip measurements taken earlier are equal.
The invention also features blade geometry that minimizes deflection at the blade tip.
Sharpening the blade can cause the blade tip to break off while in use.
This will result in a span wise varying or oscillatory lift distribution on the blade tip.
The blade slope angle and the blade tip angle are described in more detail below.
This sensor according to one embodiment provides a signal representative of the fan blade tip clearance.
Present systems for measuring the degree of blade tip twisting are highly expensive and fragile.
The tapered blade tip sweeps back and angles downward to reduce noise and increase lift.
The kingpin can be arranged on any suitable part of the blade tip clamp arrangement.
When as often happens the blade tip breaks off, a new blade is essential.
Measurements from the two tilt sensors include a blade slope angle and a blade tip angle.
Loosen the locking nut X and turn the blade tip back to its correct position.
The relative profile thickness shows a local maximum between rotor blade root and rotor blade tip.
This design will negate the need to approach the blade tip annually for inspection.
The inboard region includes the blade root and the outboard region includes the blade tip.
They are a measure of rotor blade tip Mach number.
Figure 7 shows an alternative embodiment in regard to the design of the blade tip.
