Examples of 'blower housing' in a sentence
Meaning of "blower housing"
Blower housing: Refers to the casing or enclosure that surrounds a blower or fan. It is a protective cover that houses the internal components of a blower and helps direct the flow of air or gas
How to use "blower housing" in a sentence
Basic
Advanced
blower housing
Position blower housing on top of header assembly.
Check if blower impeller blocked in blower housing.
Connect outlet blower housing to vent duct.
Secure the lower brackets to blower housing.
Remove blower housing and clean as shown.
Clean the elbow and blower housing.
Remove blower housing and clean.
Slide the glass hood on the blower housing.
Otherwise the blower housing may be damaged.
Place vent filler on left side of blower housing.
Remove blower housing and clean as nec es sary.
Remove the access cover on the blower housing.
Replace blower housing and filters.
Blower impeller blocked in blower housing.
Pull burner blower housing out to expose fan wheel.
See also
Remove three prong cord set from blower housing.
Assemble the blower housing to the blower mounting plate.
Press down on the tab on the blower housing outlet.
Position blower housing flush with wall surface and on top of outer casing.
The nozzle is installed in a blower housing surrounding the blower.
Tighten screws on upper vacuum tube to secure to blower housing.
The nozzle may be installed in a blower housing surrounding the blower.
Install replacement charcoal filter over grille in blower housing.
Attach caps and plugs from blower housing and blower front.
It is recommended that the screws be located inside the blower housing.
When installing blower housing onto wall be careful motor coil is not damaged.
Push the collection bag on to the blower housing until.
Remove blower housing and clean the area shown to prevent overheating and engine damage.
Slide unit forward using the guide on the blower housing to.
Push the tube into the blower housing until the lock engages the tube.
Remove the vacuum tube assembly from the blower housing.
Detach the blower housing from the hood by removing both retaining screws A.
Install charcoal filter over grille on blower housing and turn.
Complete tightening blower housing screws from Step 7 to wall.
The flanges must be perpendicular to the top of the blower housing.
Install charcoal filter over grille on blower housing and turn filter handle clockwise.
Align grooves in the blower pipe with pegs on the blower housing.
Blower housing or cooling fins Clean blower housing and cooling plugged . fins.
Cooling fins and air passages under engine blower housing are blocked.
The air blower housing 22 is usually made of metal.
Install charcoal filter over the grille on the blower housing and.
Check condition of blower wheel and blower housing - see chapter on " Using the Vacuum Attachment.
The advantage of this layout is that it avoids modifying the air blower housing.
Remove the 4 screws that hold the blower housing to the metal housing.
The cross section includes a swept view of a blade and a portion of a blower housing.
Press the adapter duct onto the blower housing and secure it.
This unit is equipped with integral disconnecting switch located inside the blower housing.
Loosen cap nuts inside plenum to rotate blower housing to desired position.
This prevents the filter cartridge from accidentally disconnecting from the blower housing.
The nozzle may be provided in one side of a blower housing surrounding the blower.
You'll also be interested in:
Examples of using Blower
Show more
Never use the blower in urban areas
The blower is a room of heat with no walls
Note for dual blower hood only
Examples of using Housing
Show more
Improved land and housing policies implemented
Housing systems for other livestock categories
Proportion of makeshift housing at the national level
