Examples of 'blower plate' in a sentence
Meaning of "blower plate"
blower plate: A component, usually found in machinery or engines, that is designed to increase airflow or provide ventilation. It is often used to cool down equipment or improve combustion efficiency by supplying more air to the system
How to use "blower plate" in a sentence
Basic
Advanced
blower plate
Remove the blower plate from cabinet.
Remove single blower and single blower plate.
Lift up the blower plate and put it aside.
Remove one blower unit mounting screw and one blower plate screw.
Reattach blower plate to microwave oven.
Remove and save screws that hold blower plate to the oven.
Slide blower plate from trader its retaining flange.
Remove the screw that holds the blower plate to the microwave.
Slide blower plate from under its retaining flange.
Remove and save the screw that holds the blower plate to the microwave.
Reattach the blower plate to the top of the cabinet as it was originally assembled.
Slide the damper from left to right into the tabs on the blower plate.
Remove single blower plate from hood body.
Carefully route wiring harness and ground wire through two clips attached to blower plate assembly.
Be sure to tuck dual blower plate into blower plate tabs.
See also
Remove the screws holding the blower unit and the screws securing the blower plate.
Replace the blower plate in the same position as before with the screws.
Attach with one blower unit mounting screw and then one blower plate mounting screw.
Slide the blower plate from under its retaining flange and lift it off.
Disconnect blower plug . attaching single blower plate to top of hood body.
Replace the blower plate and secure with the screws removed in step 1.
Attach transition ( if required ) to blower plate.
Hang blower unit onto blower plate screws through the large part of the keyhole.
Remove ( 4 ) screws from inside hood body attaching single blower plate.
Attach the exhaust adaptor to the blower plate with the two bronze metal screws provided.
Remove ( 4 ) screws at top of hood body attaching blower to single blower plate.
Replace blower plate with the screws removed in Step 1.
Remove ( 4 ) screws from interior of hood body attaching blower plate to hood body.
Attach single blower to dual blower plate by ( 4 ) previously removed screws from step 3.
Turn blower 180 degrees and reattach to blower plate.
Model P6 blower plate connects directly to 7 '' round ductwork without a transition.
Remove ( 4 ) screws attaching single blower to single blower plate.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Blower
Show more
Never use the blower in urban areas
The blower is a room of heat with no walls
Note for dual blower hood only
