Examples of 'blower speed' in a sentence
Meaning of "blower speed"
Refers to the velocity or rate at which air or gas is propelled by a blower or fan. The blower speed determines the strength or intensity of airflow, which can impact various applications such as cooling, ventilation, or conveying materials
How to use "blower speed" in a sentence
Basic
Advanced
blower speed
Blower speed control manual mode only.
Select an appropriate temperature and blower speed.
Through the blower speed control to reduce noise.
The green LEDs indicate blower speed.
The blower speed will be indicated on the display panel.
Press the switch corresponding to the desired blower speed.
Use the blower speed control to increase or decrease cooktop ventilation.
The blower high speed switch changes the blower speed to high.
The blower speed control changes the running speed of the blower.
The blower low speed switch turn the blower speed to low.
Increase the blower speed to move heavier materials or to clear the area more quickly.
The blower high speed switch turn the blower speed to to high.
Blower speed maximum button NOTE.
The blower medium speed switch turn the blower speed to medium.
Adjust the blower speed Increase speed Decrease speed.
See also
Repeatedly pressing the symbol button on the left or right reduces or increases blower speed.
Infinite speed slide control adjusts blower speed and sound level for quiet operation.
ACT enables the installer to easily set the maximum blower speed to.
Switch increases blower speed to medium-low speed.
The Climatronic uses only in this mode the lower blower speed.
As dots get smaller - blower speed decreases.
When a blower speed is selected, press this switch to activate the delay function.
This display shows the current Blower speed selection.
Displays blower speed level, delay off status and filter clean / replace notification.
Set Selector Switch for desired blower speed.
Switch increases blower speed to medium-high speed.
When is use, delay mode will be canceled if blower speed is modified.
Normally, the maximum blower speed is only required when using the grill.
Depending on your model, move the blower speed switch to.
Normally, the maximum blower speed is only required when grilling or using the self-cleaning cycle.
Adjust the temperature control, air direction and blower speed to maintain comfort.
If the blower speed is reduced to a minimum, Climatronic is switched off.
In other words, if the blower is supplying excessive air, the blower speed is decreased.
The blower speed control changes the speed of the blower from 1 to 3 position.
Figure 2 is a block diagram showing how the blower speed is adjusted according to the invention ;.
To turn off, press any button for the air distribution or change the blower speed.
The blower speed 2 switch turns the blower on to medium-low running speed.
To turn off the blower, press once more on the corresponding blower speed switch.
Flashes the blower speed when the 10-minute delay off has been activated.
Turn the speed control knob counterclockwise to increase blower speed - clockwise to decrease speed.
Flashes the blower speed when the 10-minutes delay off has been activated.
Thus, the pressure required by the application largely determines blower speed and diameter.
The blower speed will change each time the button is pushed from 1 to “ b ”.
Increase temperature Set the blower speed level 0.
The blower speed 3 and blower speed 4 switches operate the same as blower speed 2 switch except.
This 3-position rocker switch controls the blower speed.
The blower speed can be increased-or decreased-during delay mode without starting another 5-minute cycle.
Push the fan controls to select low, medium, or high blower speed.
Maximum blower speed icon LinkLogic Master Link Mode push-button 7.
Press once to activate the 10-minute delay off for any of the blower speed settings.
You'll also be interested in:
Examples of using Blower
Show more
Never use the blower in urban areas
The blower is a room of heat with no walls
Note for dual blower hood only
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
