Examples of 'bolt holes' in a sentence
Meaning of "bolt holes"
bolt holes - Bolt holes are places or strategies where one can seek refuge or escape, especially in times of danger or distress
How to use "bolt holes" in a sentence
Basic
Advanced
bolt holes
Bolt holes are a particularly important category of hole.
Caps for covering shipping bolt holes.
Number of bolt holes in the wheel.
Pitch circle diameter of bolt holes.
Cover bolt holes with transport bolt hole plugs.
Long leaf with three bolt holes to fix.
Two bolt holes to install.
Thus máxima of loads at single bolt holes are avoided.
The bolt holes are adapted to receive the blade bolts.
We supply versions with and without bolt holes.
All the bolt holes.
Align the bracket hole with the bolt holes.
They also serve as bolt holes when danger approaches.
I told him to send you a list of those bolt holes.
Long leaf with three bolt holes for mounting.
See also
Align the leg plate holes with the bolt holes.
Align with bolt holes in top of cabinet and tighten bolts.
Five known bolt holes.
Deck bolt holes must be drilled parallel and square to mounting faces.
Row of bolt holes.
Make sure to line up the two steel frame bolt holes.
Align exhaust gasket bolt holes with bolt holes in muffler.
Bolt holes are not accessible on the corner posts of the vehicle body.
Push the bolts through the bolt holes in the plenum.
Align bolt holes located on the inside of the grill body supports.
Diameter of virtual circle passing through center of all three bolt holes.
Align the two bolt holes in the rail with those in the.
We initially attached the brackets to the bolt holes closest to the corners.
Four bolt holes have been provided in the saw base for this purpose.
The hub may comprise a blade bearing having the bolt holes.
The extension plate has bolt holes so it can be bolted to vehicle body.
Thus also the loads in the área of the bolt holes are reduced.
Align the gasket bolt holes with the bolt holes in the muffler.
Rotate and press the hole caps into the shipping bolt holes.
Bolt holes are provided in the top and bottom members of the outer frame.
Slide handle bar through center of each bracket and line up bolt holes.
Line up the two bolt holes in saddle with handle and hose wrap as shown.
Thus the maximum of the fatigue in the área of the bolt holes is reduced.
The need to use threaded bolt holes also requires significant machining and cost.
Sawing apart is superfluous since the division is achieved primarily by drilling bolt holes.
One flattens the end of a strut and drills bolt holes at the needed length.
A plurality of tapered pin apertures are formed in the opposing flanges between the bolt holes.
Place tether into bolt holes in wheel and attach lug nut using lug wrench.
Screw the leveling legs all the way into the bolt holes in the.
B Diameter of mounting bolt holes or thread size in case of threaded holes.
Hold the support leg against the base and align the bolt holes.
Many standard SWER poles have several bolt holes to support this upgrade.
The spring and damper shafts should be visible through the bottom bolt holes.
Align the bolt holes and push the long bolt C.
Apply plenty of silicon around the openings of both sections and around all bolt holes.
You'll also be interested in:
Examples of using Bolt
Show more
Remove the bolt with a socket wrench
Bolt or clamp the saw to its support
Stiffener bracket bolt must be kept tightened
Examples of using Holes
Show more
Great holes have been cut in the earth
Always remove the lid or put holes in it
They cut holes behind every cabinet
