Examples of 'bond strengths' in a sentence
Meaning of "bond strengths"
bond strengths - Refers to the degree of attraction or force that holds atoms together in a molecule, typically measured in terms of energy required to break the bond. It is a term commonly used in chemistry and materials science
How to use "bond strengths" in a sentence
Basic
Advanced
bond strengths
This tends to produce high bond strengths.
High bond strengths are suitable to be achieved.
They give useful information on relative bond strengths.
Dry and wet bond strengths were also measured.
Such tapes are often used to attain very high bond strengths.
The bond strengths are presented in the table below.
Compounds and formulations as so provided can also achieve excellent bond strengths.
These bond strengths are for autoadhesion of the surfaces.
Hydrolysis of the compound prior to bonding may result in improved bond strengths.
The bond strengths and oxygen transmissions were determined.
This is achieved through manipulation of bond strengths between the fastening device elements.
Bond strengths were measured by shear bond strength method.
Twenty four such brackets were single primed and the bond strengths determined.
Wet and dry ply bond strengths are measured as follows.
No data is presented for a cyanoacrylate adhesive system because of the low bond strengths attained.
See also
High bond strengths are achieved by the application of heavy coats of adhesive by spraying.
This may be achieved through manipulation of bond strengths between the fastening device elements.
Bond strengths and total coverage would be increased if the total adhesives level were increased.
This chemical bond should exhibit superior bond strengths to currently available adhesive bonds.
The present invention is directed to a novel composite film with superior interlayer bond strengths.
Moreover the interlayer bond strengths of such films tend to diminish substantially with age.
Traditional adhesive compositions displayed greatly reduced bond strengths along the ranges noted above.
Bond strengths were measured immediately upon removal of the strips from the saturated paper towels.
Immediate bonding after cationic UV cure gives higher bond strengths.
The data indicate that useful bond strengths are obtained at a number of aziridine coating thicknesses.
Grit-blasted substrates exhibit good bond strengths.
Interfacial bond strengths for the polymer at the two time points did not change significantly.
Furthermore, such commercial mortars do not possess superior bond strengths.
The bond strengths of HVOF coatings are also excellent.
The data indicate that useful interlayer bond strengths are obtainable with various EAA copolymers.
Bond strengths ranging from poor to good, are given for various coating formulations.
Additionally, the compositions have rapid fixture times and good bond strengths.
Pin-to-glass bond strengths were measured after photocuring with various exposure conditions.
Moreover, the researchers were able to start connecting these different motions to different bond strengths.
The bond strengths were excellent and were stable upon exposure to thermo-cycling stresses.
Over the years, improvements have been made in fibers which provide stronger bond strengths.
The internal bond strengths of particleboards made with these four products are tabulated as follows,.
Film 1B exhibited acceptable COF, but its PVDC bond strengths were too inconsistent.
Bond strengths on phenolic substrates were, however, significantly reduced compared to TEEDA.
Strong & durable bond strengths Courtesy MDT.
The data tabulated below compare benzylic C-H bond to related C-H bond strengths.
Initial and aged bond strengths of the adhesives are reported in Table 3.
The resulting toughened epoxy adhesives typically exhibit higher bond strengths ( i.e. increased peel strengths ).
Tensile shear bond strengths and fixture times on polypropylene, polyethylene and polyacetal . Test Solution.
In general, roughened surfaces ( ~ 25μm ) give higher bond strengths than polished or ground surfaces.
Table 2, Initial bond strengths and stressed boiling water tests were performed on HNBR Ingredient.
Use of commercial adhesive with primer provides substantial bond strengths and from 68 to 88 % delamination.
Moreover, the bond strengths as well, particularly on surfaces with a low energy, are lowered sharply.
Peak loads were noted and bond strengths were calculated as g/cm2.
Bond strengths and peel strength in the application testing were determined according to DIN EN 1392.
You'll also be interested in:
Examples of using Strengths
Show more
Analysis of strengths and weaknesses of the response
These organizations have their own strengths
Identify individual strengths and highlight them
Examples of using Bond
Show more
And in so doing seal a bond of enduring friendship between us
Bond undressed and took a cold shower
The sacred bond of man and bro
