Examples of 'bond strength' in a sentence
Meaning of "bond strength"
Bond strength refers to the measure of the force or energy required to break or separate a chemical or physical bond between two substances. It indicates the durability, resilience, or adhesive power of the bond and is often used to assess the quality or effectiveness of materials, such as adhesives, glues, or welded joints
How to use "bond strength" in a sentence
Basic
Advanced
bond strength
Bond strength between concretes of different ages.
Exhibits high bond strength to most surfaces.
Bond strength between steel and concrete.
The attachment bond strength can vary.
Bond strength test by vertical shear.
Visual observations of bond strength quality were recorded.
Bur roughening did not affect bond strength.
Extremely high bond strength on numerous substrates.
No stable value for the bond strength.
A novel method for bond strength measurement is introduced.
The samples were tested for bond strength.
Comparison of bond strength test methods.
This ensures sufficient liner bond strength.
The shear bond strength was measured.
Unfilled containers must be tested for bond strength.
See also
The bond strength was measured by the following method.
After solidification an initial bond strength is built up.
Internal bond strength was also measured on the samples.
This enthalpy change is one measure of bond strength.
Curves bond strength versus slip of the steel bar.
Rapid cure and high final bond strength.
It reduced the glue bond strength and increased wettability.
Rapid achievement of final bond strength.
Bond strengths were measured by shear bond strength method.
All these facts contribute to a reduced bond strength.
Sufficient bond strength to transfer shear forces is also desirable.
Heating may improve bond strength.
Bond strength test.
This will reduce the liner bond strength.
Bond strength min.
This further increases the liner bond strength.
Internal bond strength.
It is a controlling factor in hydrogen bond strength.
Shear bond strength tests followed by electron microscopy analysis were performed.
High final bond strength.
Inhibition of this corrosion helps to retain adhesive bond strength.
Post cured bond strength.
The resultant assembly exhibited exceptionally strong bond strength.
Peel strength is an indicator of bond strength between fiber layers.
Bond strength is rated before and after a boiling water test.
Excellent adhesive bond strength.
The preferable bond strength may depend on the tile backing.
The test piece was tested for shear bond strength.
The assembly was tested for bond strength in the following manner.
The bond strength is expressed as a combination of number value and letters.
This substantially increases the bond strength of the joint.
Mechanical testing of bond strength is performed on both interfaces by shear strength examinations.
The higher the value the greater the bond strength.
Maximum bond strength.
The tensile strength at this time is defined as the bond strength.
You'll also be interested in:
Examples of using Strength
Show more
Your inner strength should be even stronger
That can only be achieved through strength
We ask for strength to surpass all understanding
Examples of using Bond
Show more
And in so doing seal a bond of enduring friendship between us
Bond undressed and took a cold shower
The sacred bond of man and bro
