Examples of 'burner' in a sentence

Meaning of "burner"

Burner is a noun commonly used to refer to a device that produces a flame for heating
Show more definitions
  • Someone or something which burns.
  • An element on a kitchen stove that generates localized heat for cooking.
  • A device that generates localized heat for experiments; a Bunsen burner.
  • A device that burns fuel; e.g. a diesel engine; a hot-air balloon's propulsion system.

How to use "burner" in a sentence

Basic
Advanced
burner
The burner lids are not correctly positioned.
Test each rangetop burner in this fashion.
Each burner has its own igniter.
He could toss that burner at any moment.
Remove burner head from burner assembly.
Be sure to unplug the burner before beginning.
Wok burner head enameled cast iron.
Be careful as the burner may be very hot.
The burner does not operate in this mode.
Refer also to the burner instruction manual.
The burner or the cooling unit is defective.
Turn off all burner control knobs.
Burner will not light with a match.
Turn infrared burner control to high position.
Burner components have not been assembled correctly.

See also

Reinstall the burner in the proper position.
Burner caps positioned properly on burner bases.
Check that the burner flames are regular.
Burner may be getting too much air.
To clean the burner head ignition ports.
Burner flame will not stay lit.
Visually inspect burner for proper operation.
Burner stops with air damper open.
Do not wash any burner parts in a dishwasher.
Burner makes popping noises during use.
Refer to the burner manual for operation.
Remove the grates and burner caps.
Turn left burner control to high position.
Hold match at base of desired surface burner.
Shut off burner after flame is viewed.
Screws are visible on the burner control panel.
Place bake burner cover on a covered surface.
Place an appropriate cooking vessel on the burner.
Assemble the burner in the opposite sequence.
Proceed as follows to light the gas burner.
Be sure burner lights and stays lit.
Reinstall spark plug into burner head.
Sear burner cooking grid with hole.
Locate orifices at burner end of gas tubes.
The burner box cover can be hot.
Remove the sear burner cover screws.
The burner flame should then go out.
Check that all burner valves are off.
Turn burner control knob to desired setting.
Connect the main burner gas fl ex line.
This burner is located in the center position.
Temperature at main burner of the rotary kiln.
Keep burner and control empartment clean.
Make sure plug is in place on burner head.
A clogged burner tube can lead to a fire.

Search by letter in the English dictionary