Examples of 'burner cover' in a sentence
Meaning of "burner cover"
burner cover: A burner cover is a decorative or protective item used to cover and conceal burners on a stove or cooktop. It can help prevent spills, splatters, and debris from accumulating on the burners, while also adding a stylish touch to the kitchen decor
How to use "burner cover" in a sentence
Basic
Advanced
burner cover
Place bake burner cover on a covered surface.
Reinstall infrared searing main burner cover.
Oven bake burner cover screws.
Remove the outdoor sear burner cover.
Attach burner cover with four screws as illustrated.
Remove the sear burner cover screws.
Replace burner cover and mounting screws to complete installation.
Remove the searing side burner cover.
Slide the bake burner cover to the right or left.
Reinstall searing side burner cover.
Remove burner cover and ensure all burners are properly seated.
Lift up on rear of bake burner cover and remove.
The burner cover is fixed in place when it audibly clicks into place.
Open the side burner cover.
Remove the burner cover and burner tube from firebox.
See also
Control board with burner cover.
Replace the burner cover plate and turn the knob.
Open the grill lid or side burner cover.
Remove the bake burner cover and place it on a covered surface.
Stainless steel protective burner cover.
Use stainless steel sear burner cover to protect finish from weather.
Reinstall access panel and oven bake burner cover.
The side burner cover may be hot if the grill burners are in operation.
Remove the infrared searing main burner cover screws.
Burner ring and burner cover must lock in place and lie evenly flat.
Align notches on the oven bake burner cover with shoulder.
The ignition sparks can be observed through the inspection window in the burner cover.
Never close the side burner cover when the burner is lit.
Guide the lit match between the grate and the burner cover.
First remove the burner cover and any cooking utensils from the burner grate.
The cover plates must slide under the burner cover as shown.
A Hestan side burner cover will go a long way toward preventing this kind of contamination.
Lift up and remove oven bake burner cover and set aside.
The capacity control module is located in the control unit under the burner cover.
Remove bubble wrap from side burner cover and set aside.
Check the distance between the ignition pin tip and the brass burner cover.
Dry all parts after cleaning and place the burner cover accurately on the burner cup.
To avoid weather damage to finish, use stainless steel sear burner cover.
Replace and tighten tighten the 2 burner cover screws, located at the front of the oven.
Using a Phillips screwdriver, remove the 2 bake burner cover.
Remove ( 1 ) screw securing burner cover located at the back wall of the firebox.
Please remember as well that the burner cover may be very hot.
Remove the oven racks and bake burner cover and set them.
Open / Remove side burner cover.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Burner
Show more
The burner lids are not correctly positioned
Test each rangetop burner in this fashion
Each burner has its own igniter
