Examples of 'burner flame' in a sentence
Meaning of "burner flame"
Burner flame refers to the flame produced by a burner, typically in a gas stove, furnace, or any other heating device. It signifies the visible combustion process where fuel, such as gas or oil, is ignited and sustained, resulting in a controlled flame that provides heat or energy for cooking, heating, or other purposes
How to use "burner flame" in a sentence
Basic
Advanced
burner flame
The burner flame should then go out.
Check for the proper burner flame characteristics.
Burner flame will not stay lit.
Typical surface burner flame at highest setting.
Burner flame is too low or too high.
Adjust surface burner flame size so it does not.
Burner flame does not burn evenly.
For simmer burner flame adjustment.
Burner flame goes off during operation.
Always inspect the burner flame after lighting.
Burner flame not touching thermocouple.
Setting proper burner flame height.
The burner flame should not ignite.
Reconnect gas source and observe burner flame.
Surface burner flame lifts off ports.
See also
A fuel rich environment results at the burner flame.
Oven burner flame can be checked as follows.
Remove burner baffle so that burner flame can be observed.
The burner flame is not ignited.
Do not broil meat too close to the burner flame.
Surface burner flame burns half way around.
Visual check for proper main burner flame appearance.
The burner flame is not uniform.
The inner portion of the dual burner flame size.
If surface burner flame lifts off the ports.
Avoid any drafts that alter burner flame patterns.
Surface burner flame is yellow in color.
Changes in pressure may cause the burner flame to extinguish.
Blocked burner flame holes will create soot.
Slide air shutter open or closed depending on appearance of burner flame.
Visually check burner flame pattern when in operation.
Center the broiler pan underneath the oven burner flame.
If burner flame pattern differs from that described.
A test specimen vertically mounted in a frame is exposed to a gas burner flame.
The burner flame is too high.
Check pilot flame pattern and burner flame pattern often.
Burner flame is yellow and gas odor can be smelled.
Do not let the burner flame extend beyond the.
Air rushing out of the split extinguished the burner flame.
Yellow main burner flame soot on the vent cap.
The rear or outer portion of the burner flame size can.
The burner flame color should be blue with no yellow.
The rear portion of the bridge burner flame size can.
Check the burner flame patterns with the image.
The inner portion of the dual burner flame size can be.
The burner flame should be made up of little blue cones.
There are situations when the burner flame goes out.
The burner flame is low.
Reconnect gas source and observe burner flame for correct operation.
The burner flame may have a yellow tip when hot.
You'll also be interested in:
Examples of using Burner
Show more
The burner lids are not correctly positioned
Test each rangetop burner in this fashion
Each burner has its own igniter
Examples of using Flame
Show more
Flame retardant materials bear the mark
Envision the flame burning within you
Flame disk or combustion heads dirty or worn
