Examples of 'burner lights' in a sentence
Meaning of "burner lights"
Burner lights refers to the process of igniting or turning on a burner, such as on a stove or a gas grill. It means to activate the flame for cooking or heating purposes
How to use "burner lights" in a sentence
Basic
Advanced
burner lights
Be sure burner lights and stays lit.
Push igniter button repeatedly until burner lights.
Be sure burner lights and stay lit.
A clicking sound will be heard until the burner lights.
Burner lights and then release.
Press the ignitor button until the burner lights.
After burner lights push in and turn knob to desired setting.
Keep pushing until the burner lights and then release.
There may be a delay of a minute or so before the grill burner lights.
If the burner lights but cuts out after the safety interval.
Keep the burner ignitor button pushed in until burner lights.
Burner lights but goes out when automatic control valve button is released.
Keep pushing piezo ignitor button until the burner lights.
The burner lights up but after few seconds the heater stops.
Push piezo igniter button repeatedly until the burner lights.
See also
When main burner lights check all connections thoroughly for gas leaks.
Check gas supply to insure pressure is maintained when main burner lights.
If the burner lights but cuts out after operating for a few minutes.
Continue to rotate and activate the igniter until the burner lights.
Each burner lights satisfactorily, individually or with adjacent burner lit.
Press and hold the electric ignitor until the burner lights.
If burner lights with match but not igniter, check the ceramic.
Then push and release the ignition button until the burner lights.
Each burner lights satisfactorily, both individually and with other burners.
It may be necessary to turn the igniter knob several times until the burner lights.
If the burner lights with a match, then check the ignition system.
Push and hold ELECTRONIC IGNITOR button until the burner lights.
Each burner lights satisfactorily, both individually and with other burners operating at the same time.
Push and hold ELECTRONIC IGNITION button until the burner lights.
If the Front burner lights with a match, then check the Crossover ignition system.
If necessary, keep pressing and rotating the knob until the burner lights.
Once the burner lights hold the knob in, on the low position for 30 seconds.
Make sure that with no demand for heating, the burner lights correctly on opening a.
Each burner lights independently - repeat steps 5-9 for the other burners.
While pressing the safety valve, push and release the ignition button until the burner lights.
If necessary, keep depressing and rotating Knob until burner lights.
Immediately, push and hold ELECTRONIC IGNITION button until the burner lights.
Press the ignition button ( 8 ) repeatedly until it sparks and the burner lights.
Push and turn the control knob to “ HIGH ” until the burner lights.
Turn the control knob quickly to the “ LO ” position after the burner lights.
Do Not leave the knob in the “ LITE ” position after burner lights.
You'll also be interested in:
Examples of using Burner
Show more
The burner lids are not correctly positioned
Test each rangetop burner in this fashion
Each burner has its own igniter
Examples of using Lights
Show more
Lights heralding modern times in the workshops
Shut off the lights when you are done
Lights up when the sleep timer is activated
