Examples of 'burner valve' in a sentence
Meaning of "burner valve"
burner valve: This phrase refers to a valve or control mechanism that regulates the flow or supply of fuel to a burner. It is commonly used in the context of heating systems, gas stoves, or industrial processes where burners are used. The valve allows for the adjustment, modulation, or interruption of the fuel supply, enabling control over the burner's operation and heat output
How to use "burner valve" in a sentence
Basic
Advanced
burner valve
Replace burner valve and kick plate.
Turning the corresponding burner valve to high.
Main burner valve not completely open.
Safety ignition device notably for burner valve.
Turn the burner valve to the desired setting.
Connect the gas supply to the side burner valve.
Turn main burner valve to regulate heat output.
Gas supply hose connection to side burner valve assembly.
Turn on burner valve and light each burner.
Remove two bolts and washers from the side burner valve.
Insert the side burner valve into the.
The burner valve should light when gas.
Loosen the side burner screws to expose the side burner valve.
Sear side burner valve assembly.
Plug the narrower connector into the side burner valve as shown.
See also
Install side burner valve and knob bezel.
The cap thereby acts on a rod which closes the burner valve.
Side burner valve stem cap.
Place the side burner control knob on the side burner valve stem.
Insert side burner valve into side burner tube.
Attach side burner electrical source wire to the side burner valve electrode as illustrated.
Depress burner valve for that burner and turn to high.
Press Knob onto side burner valve control stem.
The burner valve should light when gas is available to the burner.
Adjust the flame by turning the burner valve 2.
Turn the burner valve knobs to the off position to turn burners off.
Remove the 2 screws from the side burner valve assembly.
The burner valve can be adjusted from high to low depending upon your cooking demands.
Before lighting heater, turn main burner valve to light position.
Insert the side burner valve into the side burner control panel and bezel.
After the red indicating light comes on, turn the burner valve to the desired setting.
Insert the searing side burner valve into the searing side burner shelf control panel.
Side burner hose to Quick disconnect connection, side burner valve and orifi ce.
Insert the searing side burner valve into the searing side burner control panel and bezel.
Place the side burner knob bezel ( X ) keyhole slots over the side burner valve screws.
Turn the burner valve ON to the desired heat.
Remove two M4 bolts from the side burner valve.
Push and turn a burner valve to the LITE position.
Burner valve was left open after Flame Time cycle was used.
To shut down, turn the burner valve to the OFF position.
Side Burner Valve Insert side burner valve into side burner tube as shown.
As soon as gas is present turn the burner valve knobs to the “ OFF ” position.
Turn the burner valve knob completely counterclockwise and preheat for 15 minutes.
Align the holes of knob bezel ( I ) and the holes of side burner valve.
Turn all top burner valve knobs ON to purge gas line of air.
Insert the knob bezel ( I ) into the side burner valve stem.
Completely open main burner valve by turning control knob to HIGH position.
A burner valve as in claim 10, wherein the microcellular polymer filter is ether-type foam urethane.
When burner lights, open burner valve to ON position, to operate heater.
A burner valve mechanism typical of the prior art is illustrated in Fig . 3.
You'll also be interested in:
Examples of using Burner
Show more
The burner lids are not correctly positioned
Test each rangetop burner in this fashion
Each burner has its own igniter
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
