Examples of 'butt weld' in a sentence
Meaning of "butt weld"
This phrase is used in the context of welding and refers to a type of joint where two metal pieces are joined end-to-end by welding
How to use "butt weld" in a sentence
Basic
Advanced
butt weld
Making a butt weld in the downhand position.
Slightly reinforced butt weld.
Making a butt weld in the flat position.
Welding is carried out in the horizontal butt weld position.
Making a butt weld in the gravity position.
The two parts are joined together by means of a butt weld.
Making a butt weld in the horizontal position.
This cyclical back and forth bending results in failure of the joint in a butt weld.
Butt weld between plates with raised edges.
Fillet welding is not a type of butt weld despite its similarities.
Making a butt weld in the horizontal-vertical position.
Single Vee butt weld.
Bevel or J butt weld in a Tee or corner joint.
More specifically, a closed square butt weld may be used.
The sealing of this butt weld can itself be inspected by X-rays without difficulty.
See also
Aluminum alloys were positioned on the top portion of the welding, creating a butt weld.
Flash butt weld.
Butt weld spigots, - Disassemble the actuator for welding the.
Square butt weld.
Butt Weld Tri-Clamp.
Types of main longitudinal butt welds Circumferential butt weld.
Figure 2 Circumferential butt weld.
Figure 2 schematically depicts a butt weld joint with a square groove for each of these seams.
Preferably, it is a butt weld.
Of these, the Butt Weld and Fillet Weld are the two most common welds.
It is, therefore, often necessary to butt weld both bands.
Unless a weld penetrates close to 100 %, a butt weld will be weaker than the material welded together.
In this step, e.g., either a lap weld or a butt weld is produced.
The joint is realised as a plain butt weld at a welding speed of 4 m / min.
The gasket can be completed by a 90 ° butt weld to seal at the junction point.
