Examples of 'cable clamps' in a sentence
Meaning of "cable clamps"
are devices used to secure or hold cables or wires in place. They are typically made of metal or plastic and have a mechanism for tightening or fastening the cable. Cable clamps are often used in electrical and telecommunication installations to organize and manage cables
How to use "cable clamps" in a sentence
Basic
Advanced
cable clamps
Cable clamps allowing different cable thicknesses.
Secure all wiring with cable clamps or.
Prevent the cable clamps from touching each other.
Easy installation with screwless cable clamps.
Do not allow cable clamps to touch.
Check the tightness of parking brake cable clamps.
Secure all wiring with cable clamps or electrical tape.
Use cable clamps to attach the cable to the mast.
Secure the wiring with cable clamps or adhe.
Remove the cable clamps from the poles of the battery.
Just need some cable clamps.
Tighten the cable clamps onto the bare cable shields.
Cross bracing mount of cable clamps.
It is important that cable clamps are supervised with respect to wear.
Cable clamps of metal.
See also
This can be achieved with cable clamps or clips.
Cut the cable clamps and disconnect the electric connectors.
Secure the wiring with cable clamps or adhesive tape.
A poor connection between the battery and the cable clamps.
Cable clamps should be tight on the terminal posts and free of corrosion.
Fiber optic cable clamps.
Return the cable clamps to their storage holsters when not in use.
When using steel cables the cable clamps must be placed.
Rf cable clamps.
Secure the antenna cable with cable clamps and cable ties.
Strip the power cables so that the shields are bare at the cable clamps.
Clean the battery poles and cable clamps using a special wire brush.
Pass the electric cables through the relative holes and cable clamps.
Loosen nuts of handbrake cable clamps located near expander lever Tighten cable and tighten clamps.
The present invention relates to a device for testing cable clamps of ski lifts.
Install the cable clamps directly above the T-nuts where adequate support is available.
Wire up the unit using the supplied rubber cable clamps see electrical connection.
Insert the cable supplying the equipment and the power cable through the cable clamps.
Make sure that the unit 's cable clamps make tight connections.
Stretching of cable, • loosening of parking brake cable clamps.
Accessories such as rings, hooks or cable clamps may thus be fixed to the rail.
Battery before installation . - Secure the wiring with cable clamps or.
Cable clamp, These two cable clamps provide a neat path for the communication cables.
As previously these are therefore captive and the corresponding cable clamps 17 along with them.
Cable clamps to secure the cables if required 3.3.
Route the cable and secure it with the supplied cable clamps Accessory 5.
Cable clamps ( secures vent tube to back of ice maker ) 3.
Loosen nuts of handbrake cable clamps 2.
However, the above-described cable clamps do exhibit certain disadvantages.
Thereby the hook 108 gets clear from the cable clamps.
Non-metal cable clamps.
FIG . 5.7 Installation of steel cable clamps Install bolts and new securing cotter pins.
You'll also be interested in:
Examples of using Clamps
Show more
I do not think the clamps will be necessary
Use clamps or a vice to hold your work
Clean the metallic clamps with precaution
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
