Examples of 'cable clip' in a sentence
Meaning of "cable clip"
cable clip: This phrase refers to a small device or fastener used to secure and organize cables, wires, or cords. It is designed to keep cables neatly in place and prevent them from tangling or becoming a tripping hazard. Cable clips are commonly used in offices, homes, and other settings where multiple cables need to be managed. They are available in various sizes and materials
How to use "cable clip" in a sentence
Basic
Advanced
cable clip
Tighten cable clip screw securely.
Attach cable to lubrication pipe with cable clip.
One cable clip for multiple cable diameters.
Attach the charging cable clip to the watch so.
Cable clip for a connector assembly.
Included cable clip can secure.
Storage pouch and convenient cable clip included.
The cable clip can be fitted to the frame uprights.
Distance between the cable clip and switch.
Loosen cable clip screw securing the drive control.
Unit must be properly assembled before removing cable clip.
Insert plastic cable clip into hole on the back of handle.
Always assemble cable to saw carriage before removing cable clip.
Loosen cable clip and pull cable up to remove slack and retighten clip.
Thread the extra cable through the cable clip notches.
See also
Attach the cable with the cable clip located to the right of the terminal board.
The electric cable is secured to the upper handlebar with a cable clip.
PATCHCLIP is a cable clip that helps to manage cables with different colors and lengths.
The connection can be made at either the cable clip or the USb port.
Horizontal cable clip This cable clip is used for finishing the assembly of cable bundles.
Fasten the power cable to the GranTouch using the attached cable clip.
Rohloff Cable clip.
The entire cable can be easily removed by turning the lower cable clip.
Windscreens, clothing cable clip and protective carry case also included.
To prevent the cord from unwinding, press the cord into the cable clip see detail.
Figure 6 illustrates the cable clip loaded into a portion of the connector assembly.
If you wish, you can slide the cable behind the built-in cable clip.
If lever and cable are loose, loosen cable clip at lower end of cable.
Down cable, Cable clip faces down and the cable angles down.
In use, it is preferred that the electrical cable clip 10 is installed using a nail gun.
A support device as claimed in Claim 2, wherein said fitting is a cable clip.
Use a tie wrap or cable clip to attach the cable to the PV racking, so.
Route the data cable, as shown, securing it behind each cable clip see Figure 3.
A dedicated HDMI cable clip is supplied with the D4S.
The body is also provided with a cable clip 115.
Press the cable clip ( H ) onto the upper handlebar.
Secure the copper tube ( 3 ) to the appliance using the cable clip 5.
Figure 5 is a front perspective view of a cable clip for the connector assembly shown in Figure 3.
Loosen cable clip screw securing the drive control cable fi g. 17.
Figure 3 shows a steel blank 60 suitable for forming the electrical cable clip 10 by pressing.
Loosen cable clip screw securing the drive control cable fig . 17.
Connect the wire feeder work lead / voltage pick-up cable clip ( 3 ) to the work piece.
N The distance ( a ) between the cable clip and switch lever lockout must be about 10 in 25 cm.
Finally, secure the electrical supply cable to the lower handle using the cable clip ( 17 ) supplied.
Cable clip HZC 08 for round cables.
N Secure the cable ( 1 ) to the handlebar with the cable clip 2.
Cable clip WKK-PE for cellular concrete G ui d in g a nd r ou tin g 112 CHARACTERISTIC.
You'll also be interested in:
Examples of using Clip
Show more
I do not want to clip your wings here
Clip locked in place for cooking or transporting
Use a paper clip to gently press the
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
