Examples of 'cable should not' in a sentence
Meaning of "cable should not"
cable should not - This phrase implies that there may be an issue with a cable and it is recommended or advised not to do something related to the cable
How to use "cable should not" in a sentence
Basic
Advanced
cable should not
This cable should not be shortened or extended.
The seat tilt adjustment cable should not be too tight.
Cable should not be connected to the.
The mains power supply cable should not touch any metal parts.
Cable should not be installed directly under building or storage tank foundations.
In any case the grounding cable should not pass through the switch.
The cable should not be used for the installation or relocation of the pump.
When adjusting the bed the power cable should not get caught between moving parts!
The cable should not come into contact with the appliance when it is hot.
To totally ensure this, the AC cable should not be connected to the unit.
The cable should not come into contact with the utensil when it is hot.
Furthermore, the CAT cable should not carry an IP signal.
The cable should not touch the fan casing and must be protected against mechanical damage.
The length of this cable should not exceed 10 meters.
The power cable should not hang over the side of the working surface.
See also
IMPORTANT The length of the connecting cable should not exceed 40 m.
The grounding cable should not transmit any interference voltages.
However, the length of the sensor cable should not exceed 40 m.
The main cable should not touch any hot metal parts.
In all other cases, the total length of the cable should not exceed 1.5 m.
The power cable should not be taut.
The cable should not be more than 15 meters long.
Total length of each cable should not exceed 150 m.
The USB cable should not continue to be operated if there is visible damage.
The laying temperature of the cable should not be less than 0 °C ;.
The antenna cable should not run parallel to other cables in the vehicle.
The connecting cable should not be longer than 2 m.
The cable should not be bent or compressed .!
The main supply cable should not be used to pull or lift the machine.
USB cable should not be broken.
A damaged cable should not be repaired, but.
The power cable should not be crushed, jammed into a tight space or bent excessively.
However, this cable should not replace the life jacket.
The antenna cable should not be damaged and the plugs should be satisfactory connected.
Fourth, wire and cable should not be crossed from core material.
This phone cable should not be removed during the Self - Install of your Internet service.
The bending radius of a cable should not be less than 15 times of the cable diameter.
The power cable should not touch the hot parts of the device.
The power supply cable should not reach a 120 F temperature.
A damaged cable should not be repaired, but must be replaced.
The power supply cable should not be allowed to come into contact with hot surfaces.
The supply cable should not contact the product 's hot surface.
Note, An extension cable should not be used unless absolutely necessary.
It . The power cable should not be jammed between two objects.
The length of cable should not exceed 100 meters in total.
You'll also be interested in:
Examples of using Not
Show more
I am not really sure what that thing was
Use where walls are not perpendicular to base
I am not saying that you do not care
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
