Examples of 'channel faders' in a sentence
Meaning of "channel faders"
channel faders: Knobs or sliders on audio mixing equipment that control the volume levels of individual audio channels or tracks
How to use "channel faders" in a sentence
Basic
Advanced
channel faders
Set all remaining channel faders to zero.
All channel faders and encoders can be inverted.
Set all other channel faders to zero.
The signals are taken after the channel faders.
The channel faders are for adjusting the level of each channel.
To start playback using the channel faders.
The characteristic of the channel faders and the crossfader is adjustable.
Adjust the desired function via the channel faders.
Channel faders for channels that are not in use should be turned down.
Reset all the channel faders to.
Adjust the desired settings via the respective channel faders.
Use the channel faders for adjusting the level of the respective channel.
Adust the desired function via the channel faders.
Channel faders you can change the input level of each connected audio source.
This means it will not be affected by the channel faders.
See also
Channel faders Volume control for every input.
Reducing input levels and lowering channel faders is an appropriate remedy.
Channel faders that send DMX values to the products.
You can set the output level with the channel faders.
Channel Faders Recalibrate button Allows you to recalibrate the channel faders.
Set the corresponding gain controls and the channel faders to their lowest position.
The stereo channel faders serve as FX-return controls.
Before switching on the mixer, the channel faders.
This controller uses the Channel Faders and Channel Flash buttons for multiple uses.
The signal level of these sends is independent of the setting of the channel faders 15.
Set the LINE TRIM controls and the channel faders to their lowest setting.
Move the channel faders to control the product or products-use to move.
Slowly and carefully increase the volume using the mixer 's channel faders and master faders.
Set the channel faders which you want to use at the position between min & mid.
This mode will give you control of the DMX channels via the upper 24 channel faders.
Open the 2 channel faders of the corresponding CD inputs on your mixer.
The Master Fader determines the MAIN system 's level along with the channel faders.
Note, The channel faders are user replaceable in the unlikely event that it wears out.
The RCA AMP output by master level controlled, REC output only controlled by channel faders.
Use the channel faders ( 7 ) to adjust the desired volume ratio of the audio sources.
Pages are a method for controlling 16 channels with only 8 channel faders.
With the channel faders ( 5 ) adjust the desired vol ume ratio of the audio sources.
Input channels with gain control, cue button and super-smooth channel faders.
Channel faders Level controls for channels 1 and 2.
Crossfader only works when you move the selected channel faders ( 7 ) to the desired level!
Move any of the 8 channel faders to send DMX values to the first 8 channels of.
High-quality and super-smooth channel faders.
Therefore, the position of the channel faders ( 12 ) does not influence the extent of the effect.
If other audio sources interfere, set the corresponding channel faders ( 21 ) to minimum.
Channel faders Volume control for input-channel 1 and 2.
The signal level is controlled with Channel Faders 1 and 2, respectively.
If the effect way is used, crossfading should be made with the channel faders ( 16 ) only.
Operate as described in steps 2 to 6 under Mixing using the channel faders on page 11.
You'll also be interested in:
Examples of using Faders
Show more
The buttons and faders on those controllers are
Create a desired scene using the faders
All channel faders and encoders can be inverted
Examples of using Channel
Show more
A list of channel types appears on the display
Steer for the centre of the channel
Press on the desired channel to take a snapshot
