Examples of 'channel fader' in a sentence
Meaning of "channel fader"
channel fader - This phrase is used in the context of audio mixing or sound engineering. A channel fader is a control slider or lever on a soundboard or mixer that allows the user to adjust the volume or level of a specific audio channel or input
How to use "channel fader" in a sentence
Basic
Advanced
channel fader
Channel fader for stereo channels.
This is what you must do to change a channel fader.
Move the channel fader to the maximum level.
Audio level control on camcorder or channel fader on mixer is at zero.
Set the channel fader to the inner position.
Turn up audio level control on camcorder or channel fader on mixer.
Move the channel fader away from you.
Channel level adjustments are performed using the channel fader.
Set the channel fader to the outermost position.
Adjustment by the channel fader.
Channel fader e away from you.
The level of the punched channel depends on the channel fader.
Move the channel fader e to the very front.
The value below these controls indicates the level of the channel fader.
Move the channel fader to minimum.
See also
You can listen to any input channel while its channel fader is closed.
Stereo channel fader and other control elements.
Level of the input channel with the gain control or the channel fader.
Mono channel fader and further control elements.
This adjustment can be made even if the channel fader is set to zero level.
The channel fader should be lowered for unused channels.
Perform your mix using the cross fader or channel fader at your desire.
The channel fader curve can be adjusted by means of the.
This switch allows the user to select from three types of channel fader curve response.
The channel fader does not control the MONitor send level.
The level indication will then display the signal level ahead of the channel fader.
Set the channel fader to the nearest position towards you.
Use the CH FADER switch to select the desired channel fader response curve.
Channel fader will allow you to adjust the volume for that.
Minimise the volume using the corresponding channel fader before changing over an input selection switch.
The channel fader of channels that are not in use should be slid right down.
C CH FADER CURVE adjustment control Adjusts the curve characteristics of the corresponding channel fader.
Do not pull on the channel fader and crossfader knobs with excessive force.
In this context, a signal is picked off ahead of the channel fader.
Do not pull on the channel fader and cross fader knobs with excessive force.
In this context, a signal is picked off after the channel fader.
Following the corresponding channel fader for controlling an effect unit via the effect send control.
On / off switch for fader start function using the channel fader.
Channel fader Volume control for every input.
Channel Level Control The channel fader adjusts the overall volume of the channel.
Channel fader will allow you to adjust the volume for that particular Channel selected.
At the instant you wish to start playback, move the channel fader lever.
Each channel fader within a fixture selection can send values to only one DMX address.
After gain and sound have been adjusted, set the channel fader to minimum again.
Channel fader down, other channels at unity.
Crossfades are performed by the ESAM fader, which appears after the channel fader.
Bring the channel fader down a little to compensate, if necessary.
Via the LED level meter, control the level of the channel with the channel fader.
Channel Fader, Use the channel fader to adjust the volume of that particular channel.
The level is also influenced by the position of the channel fader 17.
You'll also be interested in:
Examples of using Channel
Show more
A list of channel types appears on the display
Steer for the centre of the channel
Press on the desired channel to take a snapshot
Examples of using Fader
Show more
The fader start function can be used
For operating the fader start function
The fader can now be removed completely
